CC-E Series
1.5-10W, Ultra Compact Single and Dual DC-DC Converters
Features
Compact Footprint / Low Profile
Through Hole or SMT Versions
5V, 12V, 24V & 48V Inputs
3.3 to 30V1 Single, ±12 to 15V Dual Outputs
Output Voltage Adjustment
Input - Output Isolation
RoHS Compliant
5 Year Warranty
Self contained
Multiple Input Voltage configurations
Open frame (no potting)
Key Market Segments & Applications
Specifications
Model
Nominal Output Voltage
DC Input
Efficiency
Output Voltage Tolerance
Output Adjustment (via trim pin)
Line Regulation
Load Regulation
Temperature Coefficient
Preload
V
V
%
%
V
mV
mV
%
-
3.3V
5V
12/15V
±12/15 (24/30)1
5V: 4.5-9.0V, 12V: 9-18V, 24V: 18-36V, 48V: 36-76V
71 to 90% model dependant
1.5-10W: ±3%, 15-25W: ±5%
±5%
3.15-3.6V
4.75-6.0V
11.4-15V
40
22.8 - 30V
80
20
40
100
6002
<± 0.02%/°C
No preload required
Output Ripple (typ./max.BW 50MHz)
Overcurrent Protection
Overvoltage Protection
Remote On/ Off
mV
-
-
40/120
30/120
Output current limiting with automatic recovery
No
CC1R5, 3, 6, & 10: RC terminal open, output is OFF;
RC terminal to -Vin (0-0.4V), output is ON
-
Operating Temp.- Convection
Operating Temp.- Forced Air
Storage Temperature
Humidity (non Condensing)
Isolation Voltage
°C
°C
°C
-
-40 to 85°C, derates linearly to 40% load from 50°C to 85°C
-40°C to 85°C with 1m/s air full load
-40°C to 85°C
95% RH max.(maximum wet-bulb temperature: 38°C)
500VAC 1 min. Input to output, input to case, output to case
Input to output, input to case, output to case: 50M ohm min. (500VDC)
980m/s2 (100G) 6ms (6 directions, each 3 times)
-
-
Isolation Resistance
Shock
m/s2
Vibration (non Operating)
Safety Agency Approvals
Weight
-
-
g
10 to 55Hz (sweep for 15min) 1.52mm constant, 3 directions X, Y, Z each 2 hours
IEC/EN/UL/CSA60950-1, IEC/EN/UL/CSA62368-1 and CE Mark
CC1R5: 3.2, CC3: 4.5, CC6: 5.8, CC10:10.0
Size (L x W x H)
in CC1R5: 0.650 x 0.654 x 0.335; CC3: 0.900 x 0.654 x 0.335; CC6: 0.900 x 0.831 x 0.335
CC10: 1.400 x 0.890 x 0.335
(DIPThrough Hole and SMD package)
(SIP Through Hole only)
Warranty
CC3 (SIP): 1.09 x 0.362 x 0.705
yrs
5 years
1. For 24V/30V output - connnect across +Vout & -Vout and
leave “common out” pin not connected
3. For 15V output connect trim to -Vout
2. Based upon equal load current from both outputs