5秒后页面跳转
CABLE-SMBUS-5PINZ_15 PDF预览

CABLE-SMBUS-5PINZ_15

更新时间: 2024-10-30 01:21:35
品牌 Logo 应用领域
亚德诺 - ADI /
页数 文件大小 规格书
4页 130K
描述
Parallel Port to IC Interface Cables

CABLE-SMBUS-5PINZ_15 数据手册

 浏览型号CABLE-SMBUS-5PINZ_15的Datasheet PDF文件第2页浏览型号CABLE-SMBUS-5PINZ_15的Datasheet PDF文件第3页浏览型号CABLE-SMBUS-5PINZ_15的Datasheet PDF文件第4页 
Parallel Port to I2C Interface Cables  
CABLE-SMBUS-3PINZ, CABLE-SMBUS-5PINZ  
GENERAL DESCRIPTION  
This data sheet provides details of the parallel port to the I2C®  
interface cables. The CABLE-SMBUS-3PINZ is for use with the  
ADM106x series of programmable power supply sequencers  
from Analog Devices, Inc. The CABLE-SMBUS-5PINZ is for  
use with the ADM1175/ADM1176/ADM1177/ADM1178 family  
of hot swap controllers and ADM119x power monitoring devices.  
Both cables provide clock (SCL), data (SDA), and GND signals.  
The CABLE-SMBUS-5PINZ also provides a CONV and an  
ALERT signal. The signals are labeled on the crimp housing  
of the cable. It is advisable to mark Pin 1 of the header on the  
board to ensure correct orientation upon connection, as shown  
in Figure 1. Figure 2 shows a schematic for the PCB contained  
in the parallel port connector for the CABLE-SMBUS-3PINZ.  
Figure 3 shows a schematic for the PCB contained in the parallel  
port connector for the CABLE-SMBUS-5PINZ.  
The dongles are designed to connect a standard PC or notebook  
parallel port to a 3-pin or 5-pin header on an evaluation board,  
system board, or preprogramming module. The dongle can then  
be used to access and program a supported I2C device using the  
appropriate PC software. Note that a suitable power supply must  
also be provided to the device.  
For more information on these devices and to download the  
evaluation software, visit www.analog.com.  
SCL  
SDA  
GND  
SCL  
SDA  
GND  
25-WAY  
TO PC  
PARALLEL PORT  
CONNECTOR  
CABLE  
PARALLEL PORT  
3-PIN HEADER ON  
3-TERMINAL  
CRIMP HOUSING  
ADM106x  
EVALUATION BOARD  
CABLE-SMBUS-3PINZ  
SCL  
SCL  
SDA  
SDA  
25-WAY  
PARALLEL PORT  
CONNECTOR  
TO PC  
PARALLEL PORT  
GND  
GND  
CABLE  
CONV  
ALERT  
CONV  
ALERT  
5-PIN HEADER ON  
ADM1175/ADM1176/ADM1177/ADM1178  
OR ADM119x  
5-TERMINAL  
CRIMP HOUSING  
EVALUATION BOARD  
CABLE-SMBUS-5PINZ  
PIN 1 IS INDICATED BY A TRIANGLE ON THE CRIMP HOUSING.  
Figure 1. Parallel Port to I2C Interface Cable Connections  
Rev. 0  
Evaluation boards are only intended for device evaluation and not for production purposes.  
Evaluation boards are supplied “as is” and without warranties of any kind, express, implied, or  
statutory including, but not limited to, any implied warranty of merchantability or fitness for a  
particular purpose. No license is granted by implication or otherwise under any patents or other  
intellectual property by application or use of evaluation boards. Information furnished by Analog  
Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog  
Devices for its use, nor for any infringements of patents or other rights of third parties that may result  
from its use. Analog Devices reserves the right to change devices or specifications at any time  
without notice. Trademarks and registered trademarks are the property of their respective owners.  
Evaluation boards are not authorized to be used in life support devices or systems.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
©2008 Analog Devices, Inc. All rights reserved.