Proximity Sensors Capacitive
Thermoplastic Polyester Housing
Types CA30CAN/CAF.....
• 4TH Generation TRIPLESHIELDTM
• Adjustable sensing distance: 2 - 20 mm flush or 4-30
mm non-flush
• Protection: short-circuit, transients and reverse polarity
• Dust and humidity compensation
• Dust or temperature alarm output
• Rated operational voltage: 10-40 VDC
• Output: DC 200 mA, NPN or PNP
• Standard Output: NO and NC
• LED indications for power-supply, output and stability
• IP67, IP68, IP69K, Nema 1, 2, 4, 4X, 5, 6, 6P, 12
• Cable and M12 connector versions available
Product Description
Ordering Key
CA30CAN25NAM1
Capacitive proximity switch
Housing diameter (mm)
Housing material
The CA30CA.. capacitive the green and yellow LEDs.
proximity switches feature an The sensing distance is
improved 4TH generation TRI- increased by 20 – 25 %
Housing length
PLESHIELDTM
technology. allowing room for additional
Furthermore, these sensors stable detection.
Detection principle
Rated operating dist. (mm)
Output type
feature increased immunity The dust alarm function
to electromagnetic interfer- gives an early warning that
ence (EMI), especially to fre- the sensing surroundings
quency drives. Not only does have to be cleaned.
4TH generation TRIPLESH- The temperature alarm func-
IELDTM feature an increased tion raises an alarm if the
EMI, but it also increases sensing surface goes beyond
the immunity to humidity and 60 degree Celsius.
Output configuration
Connection type
dust. The implementation of The sensor housing is featur-
stability indication eases the ing IP69K as well as approval
setup procedure, as both by ECOLAB for cleaning and
Stable ON and Stable OFF disinfection agents.
positions are indicated by
Type Selection
Housing Sensor
diameter type
Output Output Connection Rated operating
Ordering no.
Standard
Ordering no.
Dust alarm
Ordering no.
Temperature alarm
type
function
distance (Sn)
M 30
M 30
M 30
M 30
M 30
M 30
M 30
M 30
M 30
M 30
M 30
M 30
M 30
Flush
Flush
Flush
Flush
Flush
Flush
Flush
Non-Flush NPN
Non-Flush NPN
Non-Flush PNP
Non-Flush PNP
Non-Flush PNP
Non-Flush PNP
NPN
NPN
PNP
PNP
PNP
PNP
PNP
NO+NC Cable
NO+NC M12 Plug
NO+NC Cable
0 - 16 mm
0 - 16 mm
0 - 16 mm
0 - 16 mm
0 - 16 mm
0 - 16 mm
0 - 16 mm
0 - 25 mm
0 - 25 mm
0 - 25 mm
0 - 25 mm
0 - 25 mm
0 - 25 mm
CA30CAF16NA
CA30CAF16NAM1
CA30CAF16PA
NO+NC M12 Plug
CA30CAF16PAM1
NO
NC
NC
Cable
Cable
M12 Plug
CA30CAF16PODU1) CA30CAF16POTA1)
CA30CAF16PCDU1) CA30CAF16PCTA1)
CA30CAF16PCM1DU2)
NO+NC Cable
NO+NC M12 Plug
NO+NC Cable
CA30CAN25NA
CA30CAN25NAM1
CA30CAN25PA
NO+NC M12 Plug
CA30CAN25PAM1
NO
NC
Cable
Cable
CA30CAN25PODU3) CA30CAN25POTA3)
CA30CAN25PCDU3) CA30CAN25PCTA3)
1) Replaced by CA30CAF16BPA2IO
2) Replaced by CA30CAF16BPM1IO
3) Replaced by CA30CAN25BPA2IO
Specifications EN 60947-5-2
Rated operating distance (Sn)
Non-flush mounted sensor
Flush mounted sensor
0 - 16 mm (factory setting
16 mm - non-flush mounted)
(ref. target 48x48 mm ST37,
1 mm thick, grounded)
0 - 25 mm (factory setting
25 mm),
(ref. target 75x75 mm ST37,
1 mm thick, grounded)
Specifications are subject to change without notice (10.12.2020)
1