CERAMIC MOLDED/RADIAL - HIGH RELIABILITY
GR900 SERIES (BP DIELECTRIC)
CAPACITOR OUTLINE DRAWINGS
DIMENSIONS — MILLIMETERS (INCHES)
T
Size
Code
L
Thickness
Max.
W
Width
Length
0805
1005
1206
1210
1805
1808
1812
1825
2225
2.03 (.080) 0.38 (.015) 1.27 (.050) 0.38 (.015)
2.56 (.100) 0.38 (.015) 1.27 (.050) 0.38 (.015)
3.07 (.120) 0.38 (.015) 1.52 (.060) 0.38 (.015)
3.07 (.120) 0.38 (.015) 2.56 (.100) 0.38 (.015)
4.57 (.180) 0.38 (.015) 1.27 (.050) 0.38 (.015)
4.57 (.180) 0.38 (.015) 2.03 (.080) 0.38 (.015)
4.57 (.180) 0.38 (.015) 3.18 (.125) 0.38 (.015)
4.57 (.180) 0.38 (.015) 6.35 (.250) 0.38 (.015)
5.59 (.220) 0.38 (.015) 6.35 (.250) 0.38 (.015)
1.4 (.055)
1.5 (.059)
1.6 (.065)
1.6 (.065)
1.4 (.055)
1.6 (.065)
2.03 (.080)
2.03 (.080)
2.03 (.080)
ORDERING INFORMATION
C 0805 A 103 K 5 X A C
END METALLIZATION
C—Tin-Coated, Final (SolderGuard II)
H—Solder-Coated, Final (SolderGuard I)
CERAMIC
SIZE CODE
See table above
SPECIFICATION
A — KEMET GR900 (CHIPS)
CAPACITANCE CODE
Expressed in Picofarads (pF)
First two digit-significant figures.
Third digit-number of zeros. (Use 9 for 1.0 thru 9.9 pF.
Example: 2.2 pF — 229).
FAILURE RATE LEVEL
(%/1,000 HOURS)
A—Standard—Not applicable
CAPACITANCE TOLERANCE
M — 20% G — 2% (G(BP) Temperature Characteristic Only)
TEMPERATURE CHARACTERISTIC
Designated by Capacitance Change over
Temperature Range
G—BP ( 30 PPM/C )
X—BX ( 15%, +15%, -25% with bias.)
K — 10%
J — 5%
F — 1% (G(BP) Temperature Characteristic Only)
*D — 0.5 pF (G(BP) Temperature Characteristic Only)
*C — 0.25 pF (G(BP) Temperature Characteristic Only)
*These tolerances available only for 1.0 through 10 pF capacitors.
VOLTAGE
1—100
2—200
5—50
MARKING
Capacitors shall be legibly laser marked in contrasting color with
the KEMET trademark and 2-digit capacitance symbol.
17
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com