Applicable standard
Operating
Storage
-40 °C to +90 °C ( 90 %RH Max.)
-20 °C to +70 °C ( 90 %RH Max.)
temperature range
temperature range
Characteristic
impedance
-- W
----
50 Ω ( 0 to 30 GHz)
Rating Power
----
Peculiarity
Applicable cable
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
X
--
X
--
ELECTRICAL CHARACTERISTICS
Contact resistance
10 mA Max.(DC or 1000 Hz)
Center contact 60 mΩ Max.
X
X
X
X
--
--
--
--
Outer contact 20 mΩ Max.
500 MΩ Min.
Insulation resistance
Withstanding voltage
100 V DC.
200 V AC for 1 min. current leakage 2 mA Max.
Frequency 0 to 15 GHz.
Frequency 15 to 20 GHz.
Frequency 20 to 30 GHz.
Frequency - to - GHz.
No flashover or breakdown.
VSWR 1.4 Max.
VSWR 1.5 Max.
VSWR 1.6 Max.
--- dB Max.
2
Voltage standing
wave ratio
X
--
--
--
Insertion loss
MECHANICAL CHARACTERISTICS
Contact insertion and
extraction forces
Insertion and
φ
---
with steel gauge.
Insertion force
Extraction force --- N Min.
Insertion force 30 N Max.
--- N Max.
--
--
X
X
--
--
--
--
Measured with an applicable connector.
20 times insertion and extractions.
extraction forces
Mechanical operation
Extraction force 3 to 25 N
1)Contact resistance:
Center contact 65 mΩ Max.
X
--
Outer contact 25 mΩ Max.
2)No damage, cracks or looseness of parts.
1)No electrical discontinuity of 1 μs.
2)No damage, cracks or looseness of parts.
Vibration
Shock
Frequency 10 to 100 Hz single amplitude 1.5 mm,
59 m/s2 over 5 cycles in 3 directions.
735 m/s2 directions of pulse 11 ms
X
X
--
--
at 3 times in 6 directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of -- mm/min. and record the strength at which
the cable or connector breaks.
-- N Min.
--
--
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at +40 °C, 95 %
total -- cycles.( 96 h)
1)Insulation resistance: 10 MΩ Min.
(at high humidity)
2) Insulation resistance: 500 MΩ Min.
(when dry)
3)No damage, cracks or looseness of parts.
No damage, cracks or looseness of parts.
X
X
--
--
Rapid change of
temperature
Temperature
Time
-40 → - → +90 → - °C
30 → 3 → 30 → 3 min.
Under 5 cycles.
1
Count
1
Description of revisions
DIS-D-00004497
Designed
YJ.HAGA
Checked
NK.NINOMIYA
Date
20191023
1
KH.IKEDA
MH.TSUCHIDA
YJ.HAGA
20171125
Approved
Checked
Designed
Drawn
Remark
20171125
20171125
20171125
1. The quantity of this product is 20,000 connectors per reel.
2
Measured with an applicable inspection adapter.
Unless otherwise specified, refer to IEC 60512.
YJ.HAGA
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-375224-90-00
C.FL-R-SMT-1(90)
SPECIFICATION SHEET
1
△
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL331-2200-0-90
FORM HD0011-2-1