BZW06 Series
TRANSZORB® Transient Voltage Suppressor
Stand Off Voltage 5.8 to 376V
Peak Pulse Power 600W
Features
F126
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Glass passivated junction
0.034 (0.86)
• Uni and Bidirectional Types Available
• Excellent Clamping Capability
0.028 (0.71)
DIA.
1.220 (31)
1.024 (26)
MIN.
• Low incremental surge resistance
• Fast response time: theoretically (with no parisitic
inductance) less than 1.0ps from 0 Volts to V
(BR)
for unidirectional and 5.0ns for bidirectional types
• High temperature soldering guaranteed:
265°C/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3 kg) tension
0.250 (6.35)
0.238 (6.05)
Mechanical Data
Case: F126 molded plastic body over passivated
0.120 (3.05)
0.116 (2.95)
DIA.
junction
Terminals: Solder plated axial leads, solderable
1.220 (31)
1.024 (26)
per MIL-STD-750, Method 2026
Polarity: For unidirectional types the color band
denotes the cathode, which is positive with respect
to the anode under normal TVS operation
Mounting Position: Any
Weight: 0.015oz., 0.4g
Dimensions in inches and (millimeters)
Packaging codes-options:
1-1K per Bulk box, 40K per box
4-4K per 13” reel, 16K per box
Maximum Ratings and Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol
Value
Unit
Peak pulse power dissipation with a 10/1000µs
waveform (Note 1, Fig. 1)
PPPM
600
W
Peak pulse current with a 10/1000µs waveform (Note 1)
IPPM
See Next Table
1.7
A
Steady state power dissipation at TA=75°C
lead lengths, 0.375" (9.5mm) (Note 2)
PM(AV)
W
Peak forward surge current, 10ms single half
sine-wave superimposed on rated load
unidirectional only
IFSM
100
A
Thermal Resistance junction to lead
junction to ambient Llead = 10mm
RθJL
RθJA
60
100
°C/W
°C
Operating junction and storage temperature range
TJ, TSTG
–65 to +175
Notes:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig. 2.
Rating is 500W between 40V and 188V types.
For a surge greater than the maximum values, the diode will short circuit.
(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5.
7/3/00