BZW04P-5V8 thru BZW04-376
Vishay General Semiconductor
®
TRANSZORB Transient Voltage Suppressors
FEATURES
• Glass passivated chip junction
• Availablein uni-directionaland bi-directional
• 400 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty
cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Solder dip 260 °C, 40 s
DO-204AL (DO-41)
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
PRIMARY CHARACTERISTICS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor
units for consumer, computer, industrial and
telecommunication.
VWM
5.8 V to 376 V
PPPM
400 W
1.5 W
40 A
PD
IFSM (uni-directional only)
TJ max.
175 °C
MECHANICAL DATA
Case: DO-204AL, molded epoxy over passivated chip
Molding compound meets UL 94 V-0 flammability
rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, high reliability/
automotive grade (AEC Q101 qualified)
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional types, use
BZW04P-6V4B).
B
suffix (e.g.
Electrical characteristics apply in both directions.
E3 suffix meets JESD 201 class 1A whisker test, HE3
suffix meets JESD 201 class 2 whisker test
Note: BZW04-213(B) ~ BZW04-376(B) for commercial grade only
Polarity: For uni-directional types the color band
denotes cathode end, no marking on bi-directional
types
MAXIMUM RATINGS AND THERMAL CHARACTERISTICS (T = 25 °C unless otherwise noted)
A
PARAMETER
SYMBOL
PPPM
IPPM
LIMIT
UNIT
Peak pulse power dissipation with a 10/1000 µs waveform (1) (Fig. 1)
Peak pulse current with a 10/1000 µs waveform (1)
400
W
See next table
1.5
A
Power dissipation on infinite heatsink at TL = 75 °C (Fig. 5)
Peak forward surge current, 8.3 ms single half sine-wave uni-directional only (2)
Maximum instantaneous forward voltage at 25 A for uni-directional only (3)
Operating junction and storage temperature range
PD
W
IFSM
40
A
VF
3.5/5.0
V
TJ, TSTG
- 55 to + 175
°C
Notes:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
(3) VF = 3.5 V for BZW04P(-)188 and below; VF = 5.0 V for BZW04P(-)213 and above
Document Number: 88316
Revision: 22-Oct-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
1