BZW04P-5V8 thru BZW04-376
Vishay Semiconductors
formerly General Semiconductor
TRANSZORB® Transient Voltage Suppressors
Peak Pulse Power 400W
Stand-off Voltage 5.8 to 376V
Features
DO-204AL (DO-41 Plastic)
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Glass passivated junction
• 400W peak pulse power capabililty with a 10/1000µs
waveform, repetition rate (duty cycle): 0.01%
• Excellent clamping capability
1.0 (25.4)
MIN.
• Low incremental surge resistance
• Very fast response time
• Typical ID less than 1µA above 10V rating
0.107 (2.7)
0.080 (2.0)
DIA.
• High temperature soldering guaranteed:
265OC/10 seconds, 0.375” (9.5mm) lead length, 5lbs.
(2.3 kg) tension
0.205 (5.2)
0.160 (4.1)
Mechanical Data
Case: JEDEC DO-204AL molded plastic body over passi-
vated junction
Terminals: Plated axial leads, solderable per
MIL-STD-750, Method 2026
1.0 (25.4)
MIN.
Polarity: For unidirectional types the color band denotes
the cathode, which is positive with respect to the anode
under normal TVS operation
0.034 (0.86)
0.028 (0.71)
DIA.
Mounting Position: Any
Weight: 0.012 oz., 0.3 g
Dimensions in inches and (millimeters)
Packaging Codes – Options (Antistatic):
51 – 1K per Bulk box, 10K/carton
Devices for Bidirectional Applications
54 – 5.5K per 13" paper Reel
For bi-directional use add suffix letter “B” (e.g. BZW04P-
(52mm horiz. tape), 16.5K/carton
6V4B). Electrical characteristics apply in both directions.
73 – 3K per horiz. tape & Ammo box, 30K/carton
Maximum Ratings and Thermal Characteristics(TA = 25°C unless otherwise noted)
Parameter
Symbol
Limit
Minimum 400
See Next Table
1.0
Unit
W
Peak pulse power dissipation with a 10/1000µs waveform
(Note 1, Fig. 1)
PPPM
Peak pulse current with a 10/1000µs waveform (Note 1)
IPPM
A
Steady state power dissipation
PM(AV)
W
at TL = 75OC, lead lengths 0.375” (9.5mm) (Note 2)
Peak forward surge current, 8.3ms
single half sine-wave unidirectional only (Note 3)
IFSM
40
A
Maximum instantaneous forward voltage
at 25A for unidirectional only (Note 4)
VF
3.5/5.0
V
Operating junction and storage temperature range
TJ, TSTG
–55 to +175
°C
Notes: (1) Non-repetitive current pulse, per Fig.3 and derated above TA = 25°C per Fig. 2
(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5
(3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
(4) VF = 3.5V for BZW04P(-)188 & below; VF = 5.0V for BZW04P(-)213 & above
Document Number 88316
08-Jul-03
www.vishay.com
1