BXB75 Series
S i n g l e o u t p u t
DC/DC CONVERTERS 50-75W Wide Input DC/DC Converters
1
• Industry standard footprint
• MTBF >1.4 million hours (Bellcore 332)
• Input voltage to ETS300-132-2
• Adjustable output voltage
• No minimum load required
• Separate case ground pin
• 2:1 input range for battery powered applications
• Undervoltage lockout (UVLO)
• UL, VDE and CSA safety approvals
The BXB75 Series are high power density DC/DC converters packaged in the industry
standard footprint (2.40 x 2.28 x 0.50 inches) to give designers optimum choices when
specifying for both new and replacement designs. Suitable for a wide range of
applications in nearly any industry, the BXB75 was particularly designed with
communication and distributed power applications in mind. Using Bellcore 332, the
MTBF is greater than 1,400,000 hours. Aluminum baseplate technology with four
threaded M3 inserts makes heatsink attachment and optimum thermal management
easy. The BXB75 series is approved to IEC950 by UL, CSA and VDE.
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
INPUT SPECIFICATIONS (continued)
Undervoltage lockout
48Vin: power up
48Vin: power down
34V
60% to 110%
±1.0%
±0.05%
±0.10%
0%
32.5V
Set point accuracy
Start-up time
(See Note 8)
Power up
Remote ON/OFF
20ms
20ms
Line regulation
Load regulation
Minimum load
Overshoot
Low line to high line
Full load to min. load
EMC CHARACTERISTICS
Conducted emissions
(See Note 3)
Bellcore 1089
Level A
Level A
Level A
FCC part 15
At turn-on and turn-off
None
EN55022, CISPR22
Undershoot
None
GENERAL SPECIFICATIONS
Ripple and noise
(5Hz to 20MHz)
(See Note 1)
3.3V and 5V
12V
75mV pk-pk,
20mV rms
100mV pk-pk,
30mV rms
Efficiency
See table
Isolation voltage
Input/case
Input/output
Output/case
1500VDC
1500VDC
1500VDC
Temperature coefficient
±0.01% /°C
Switching frequency
Fixed
500kHz typ.
Transient response
(See Note 2)
±2.0% max. deviation
170µs recovery
Approvals and
standards (See Note 5)
VDE0805, EN60950, IEC950
UL1950, CSA C22.2 No. 950
to within ±1.0%
Case material
Aluminum baseplate
with plastic case
Remote sense
0.5VDC transmission
line drop compensation
Material flammability
Weight
UL94V-0
INPUT SPECIFICATIONS
Input voltage range
Input current
110g (3.88oz)
48Vin nominal
36 to 75VDC
MTBF
Bellcore 332
MIL-HDBK-217F
1,400,000 hours min.
580,000 hours min.
No load
Remote OFF
100mA max.
20mA max.
@ 40°C, 100% full load
Input current (max.)
(See Note 4)
3.5A max. @ Io max.
and Vin = 0 to 75V
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Altitude
Operating case temp. -40°C to +100°C
Input reflected ripple
(See Note 6)
5mA pk-pk
Non-operating
-55°C to +125°C
Active low remote ON/OFF
(See Note 7)
Operating
Non-operating
10,000 feet max.
40,000 feet max.
Logic compatibility
Open collector ref to -input
1.2VDC max.
ON
OFF
Open circuit
Vibration
5Hz to 500Hz
2.4G rms (approx.)
File Name: BXB75S.PDF Rev: 02 Oct 2002