Datasheet
Low Duty LCD Segment Driver
For Automotive COG Application
BU91R63CH-M Max 176 segments (SEG44 x COM4)
General Description
Key Specifications
BU91R63CH-M is a 1/4, 1/3, 1/2 duty or Static COG type
LCD driver that can be used for automotive applications
and can drive up to 176 LCD segments.
Supply Voltage Range:
LCD Drive Power Supply Range:
Operating Temperature Range:
Max Segments:
+2.7 V to +6.0 V
+2.7 V to +6.0 V
-40 °C to +105 °C
176 Segments
It can support operating temperature of up to +105 °C and
compliant for AEC-Q100, as required for Automotive
Application. It has integrated display RAM for reducing
CPU load. Also, it is designed with low power
consumption and no external component needed. It
includes read function for display RAM and command
register, which make it possible to detect malfunction due
to noise. Also a defective mounting of COG can easily be
controlled by using pins to measure ITO resistance.
Display Duty:
Bias:
1/4, 1/3, 1/2, Static Selectable
1/2, 1/3 Selectable
Interface:
2-wire Serial Interface
Special Characteristics
ESD(HBM):
Latch-up Current:
±2,000 V
±100 mA
Features
Applications
AEC-Q100 Compliant (Note 1)
Instrument Clusters
Climate Controls
Car Audios / Radios
Metering
White Goods
Healthcare Products
1/4, 1/3, 1/2 Duty or Static Setting Selectable
1/4 Duty Drive: Max 176 Segments
1/3 Duty Drive: Max 132 Segments
1/2 Duty Drive: Max 88 Segments
Static Drive: Max 44 Segments
Integrated Buffer AMP for LCD Driving
Support Read Register and Display RAM Function
Support ITO Resistance Measurement
Integrated Oscillator Circuit
Battery Operated Applications
etc.
Integrated EVR Function to Adjust LCD Contrast
Integrated Power On Reset Circuit
No External Components
Package
Au BUMP Chip
Low Power Consumption Design
(Note 1) Quality Information:
There is data when LSI was put on a temporary package.
Please use it as reference data.
Typical Application Circuit
[LCD module]
44 x 4 dots
(Top view)
3
0
0
43
COM
BU91R63CH-M (Bottom view)
VLCD VSS VDD SCL SDA
(Note 2)
SEG
(Note 2) SDA of BU91R63CH-M needs pull-up
resistor because it is an open-drain output.
In case that SCL of MCU has open-drain structure,
it also needs pull-up resistor.
VLCD VSS VDD
MCU
SCL SDA
〇Product structure: Silicon monolithic integrated circuit 〇This product has no designed protection against radioactive rays
.
www.rohm.com
TSZ02201-0P4P0D301380-1-2
15.Oct.2019 Rev.002
© 2015 ROHM Co., Ltd. All rights reserved.
1/40
TSZ22111 • 14 • 001