BU-63147 and BU-63149
MIL-STD-1553 DATA BUS
+5V TRANSCEIVER
FEATURES
DESCRIPTION
The BU-63147/49 transceiver is a input enables or disables the receiv-
complete dual transmitter and er’s outputs.
receiver pair conforming fully to
+5V Power Supply
Low Power
•
•
•
MIL-STD-1553A
Features include:
and
1553B. The transmitter section accepts
monolithic bi-phase TTL signal data at its
Conforms Fully To MIL-STD-1553A
and 1553B
design, +5V power supply voltage, TX DATA IN and TX DATA IN inputs
Harris or Smiths type decoder and produces phase-modulated
interface, completely independent bipolar data at the TX DATA OUT
dual redundant operation, and and TX DATA OUT outputs. The
Dual Transceiver
•
•
small size (36-pin DIP).
The transmitter’s output voltage level is
Available with MIL-STD-1760
Compliant Transmitter Voltage
receiver section of the BU- typically about 11Vpp. An external
63147/49 series accepts phase- input, INHIBIT, takes priority over the
modulated bipolar data from a transmitter inputs and disables the
MIL-STD-1553 Data Bus and pro- transmitter when activated with a
duces TTL Signal data at its out- logic “1”.
Available with McAir Compatible
Waveform
•
put.
The small size, +5V power supply
36-Pin DIP
•
•
The RX DATA OUT and RX DATA voltage, and compliance with
OUT outputs represent positive and MIL-STD-1553 simplify engineering
negative variations of the input data design, making it an excellent choice
signals beyond an internally fixed for interfacing with any MIL-STD-
threshold level. An external STROBE 1553 system.
HARRIS or SMITHS I/O
Compatibility
+5 V
RECEIVER STROBE
1553
DATA
BUS
BI PHASE
TTL DATA
PHASE MODULATED
BIPOLAR DATA
RECEIVER SECTION
COMPARATOR
RX DATA IN
FILTER
RX DATA OUT
SHORT OR
LONG STUB
COUPLING
ISOLATION
TRANSFORMER
DECODER
RX DATA OUT
RX DATA IN
FILTER
COMPARATOR
TRANSMITTER SECTION
TX Data Out
TX Data Out
SHAPING
NETWORK
TX DATA IN
ENCODER
SHAPING
NETWORK
TX DATA IN
TX INHIBIT
CASE/GND
FIGURE 1. BU-63147/49 BLOCK DIAGRAM (one channel shown)
© 2000 Data Device Corporation