Time and hours meters electronic
2 presets, PNP, NPN or AC logic
Display LCD, 6-digits, programmable
BE134
Features
– Hour counter with 2 presets
– Display 6-digits
– Totalizer for hour
– Counting range 9999.99 s / 999.95.9 min / 9999.59 min
/ 9999.59 h
– With reset
– Connection: Count impulse, NPN, PNP, AC logic
– Batch counter with preset
BE134 with two presets
Technical data - electrical ratings
Technical data - mechanical design
Voltage supply
22...50 VAC (50/60 Hz)
85...265 VAC (50/60 Hz)
12...30 VDC
Operating temperature
Storing temperature
Relative humidity
E-connection
0...+50 °C
-20...+70 °C
80 % non-condensing
Plug-in screw terminals
1.5 mm²
Power consumption
Sensor supply
5 VA, 5 W
AC: 24 VDC ±20 % / 100 mA
DC: 9...28 VDC / 100 mA
Core cross-section
Protection DIN EN 60529 IP 65 face with seal
Display
LCD, 7-segment display,
2-lines, backlit
Operation / keypad
Housing type
Membrane with softkeys
Built-in housing
48 x 48 x 100 mm
100 mm
Number of digits
Digit height
Function
6-digits
8-digits - totalizer in 2 steps
Dimensions W x H x L
Installation depth
Mounting
7 mm (count)
4 mm (preset)
Clip frame
Hour counter
Main counter with 2 presets
Cutout dimensions
Materials
45 x 45 mm (+0.6)
Housing: Makrolon 6485 (PC)
Keypad: Polyester
Count mode
Counting frequency
Operating mode
Data memory
Reset
Adding or subtracting
Batch counter: approx. 20 Hz
Time meter and hour counter
>10 years in EEPROM
Button, electric or automatic
Yes, electric (keylock)
Optocoupler
Weight approx.
150 g
Keylock
Outputs electronic
Outputs relay
Normally open or closed,
programmable
Output holding time
Interface
0.01...99.99 s
RS485
Standard
Protection class II
DIN EN 61010-1
Overvoltage category II
Pollution degree 2
Emitted interference
Interference immunity
DIN EN 61000-6-4
DIN EN 61000-6-2
Programmable
parameters
Measuring units, sensor logic
Control inputs
Approvals
UL/cUL, CE conform
www.baumerivo.com
1