Thick Film Power Resistors
Type BDS100 Series
Key Features
I 100W in a 9.5cm2 footprint
• Gives an impressive
power density of
10.5W/cm2
I Virtually inductance-free
• Inductance < 40nH
I Wide resistance range:
0.47Ω to 1MΩ
• Coupled with 1%
tolerance gives ultimate
design flexibility
I Multiple terminal
configurations and
multi-resistor packages
• The space saving
solution
I Partial discharge
<10pC at 2kV
• Guaranteeing quality,
reliability and long life
With less than 40nH inductance and a 100Watt power rating in an easy-mounting
38mm x 25mm Isotop case, the BDS100 offers high power density over a wide range of
ohmic values (R47 – 1M0) and benefits from 10 years experience in the field. Available in
6 resistor configurations with 2 or 4 easy to connect terminals, the resistors are made from
quality materials for optimum reliability and stability with very low partial discharge.
TE Connectivity can test resistors to conform to relevant customer specifications, and will
advise on the use of resistors for pulse energy and high voltage applications (HV designs
available). Resistors with alternative terminations or flying leads are available, and custom
designs are welcome. This product is available via distribution.
Applications
I Snubbing
(Low inductance)
I Balancing Resistor
(Multi-resistor package)
I Filter (Low inductance)
I High Voltage
Characteristics -Electrical
I High Frequency
Resistance Range:
Resistance Tolerance:
TCR:
R47 - 1MO
10%, 5% (Tighter by discussion)
250ppm/°C
R<1Ω
R>1Ω
150ppm/°C
Rated Power:
Capacitance:
Heatsink: 115°C / 100°C / 60°C
Parallel
25W / 50W / 100W
15pF
To Earth
40nH (Maximum)
500Vdc/ac rms
2.5kVac rms
4kV
40pF
Series Inductance:
Limiting Element Voltage:
Isolating Voltage:
Single Shot Voltage:
Insulation Resistance:
Partial Discharge:
(100W or Less)
(Terminal to Heatsink)
1.5/50ms
(at 500V dc)
at 2kV
>100GΩ
<10pC
Heat Dissipation:
Although the use of proprietary heat sinks with lower thermal resistance is
acceptable, up rating is not recommended. The use of proprietary
heat sink compound to improve thermal conductivity is essential.
Characteristics - Environmental
Endurance (Rated Power):
Humidity Load Life:
Temperature Cycling:
Operating Storage Temp:
Short Term Overload:
Vibration:
2000cyc. at PRated
56 Days, 40°C, 95% RH
-55°C to +125°C, 5cycles
-55°C to +125°C
Rated
ΔR 0.25% Typ
ΔR 0.25% Typ (I.R.>10GΩ)
ΔR 0.25% Typ
3 x P
10/500Hz
40g 4000 bumps
(10s)
ΔR 0.25% Typ
ΔR 0.25% Typ
ΔR 0.25% Typ
Bump:
1773308 CIS BI 11/2011
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to: te.com/help