Datasheet
6V to 20V, 1A 1ch
PWM Buck Converter Integrated FET
BD9227F
General Description
Key Specifications
The BD9227F is a 20V, 1A non-synchronous PWM duty
control buck converter with integrated internal high-side
20V Power MOSFET. Operating frequency is 1.0MHz
fixed by inner circuit. Current mode control with internal
slope compensation simplifies the external compensation
calculation and reduces component count while allowing
the use of ceramic output capacitors. Additional
protection features are included such as Over Current
Protection, Thermal Shutdown and Under Voltage
Lockout. The under voltage lockout and hysteresis can
be set by external resistor. The BD9227F is available in
SOP8.
Input Voltage Range:
Ref. Precision: PWM=H: ±2.0 %(±1.0 %@Ta=25°C)
Max Output Current:
Switching Frequency:
6V to 20 V
1A (Max.)
1.0MHz (Typ.)
Operating Temperature Range: -40℃ to +85°C
Packages
W(Typ) x D(Typ) x H(Max)
5.00mm x 6.20mm x 1.71mm
SOP8
Features
■
■
■
■
■
■
Wide Operating Input Range 6V to 20V
20V/200mΩ Internal Power MOSFET
1.0MHz Fixed Operating Frequency
Current Mode
Over Current Hiccup Period Protection
Under Voltage Locked Out(UVLO), Over Voltage
Protection(OVP), Thermal Shut Down(TSD)
Available in SOP8 Package.
SOP8
Applications
Home Appliance
VM Motor
■
Typical Application Circuits
VB
NON
PWM
FB
CNON:
1uF
CVB:
0.1uF
VCC
VCC
LX
PWM
CVCC:
10uF
L1:10uH
VOUT
COUT:
10uF
D1
GND
COMP
C2:
1.5nF
R1:
110k
BD9227F
R3:
33k
R2:
10k
Figure 1. Typical Application Circuit
○Product structure:Silicon monolithic integrated circuit ○This product is not designed for protection against radioactive rays
.www.rohm.com
TSZ02201-0252AAJ00010-1-2
8.Jun.2016 Rev.001
© 2016 ROHM Co., Ltd. All rights reserved.
1/25
TSZ22111・14・001