Datasheet
Constant Current LED Drivers
50V 500mA
1ch Source Driver for Automotive
BD83732HFP-M BD83733HFP-M
General Description
Key Specifications
BD83732HFP-M and BD83733HFP-M are 50V tolerant
LED current drivers. Suitable for Automotive LED
applications, it can control light through constant current
output with control using PWM.
Input Voltage Range: 4.5V to 42V
Max Output Current: 500mA (Max)
Output Current Accuracy: ±5% (Max)
Operating Temperature Range: -40°C to +125°C
Having LED open/short detective circuit and LED current
de-rating functions integrated, it can deliver high reliability.
By utilizing Rohm’s patented PBUS function, it is possible
to turn OFF all LEDs when a row of LEDs are
short/open-circuited if multiple number of the ICs are used
In case the LED connected to the output IOUT terminal
has 2 LEDs in serise, BD83732HFP-M has to be used, in
case of 3 LEDs in series - BD83733HFP-M ( Refer to
Page.18 LED Open Detection / Disable LED Open
Detection ).
Packages
W(Typ) x D(Typ) x H(Max)
9.395mm x 10.540mm x 2.005mm
HRP7
Features
AEC-Q100 Qualified
Variable form Constant-Current Source Driver
PWM Dimming Function
LED constant current set by external resistor
LED Current De-rating Function
LED Open/Short detection
HRP7
Disable LED Open Detection at low power supply
Temperature Protective
Abnormal Output Detection and Output Functions
(PBUS)
Application
On-board Exterior Lamp
(Rear Lamp, Turn Lamp, DRL/Position Lamp,
Fog Lamp, etc.)
On-board Interior Lamp
(Air Conditioner Lamp, Interior Lamp,
Cluster Light, etc.)
Basic Application Circuit
D1
RVIN_F
VIN_F
VIN
IOUT
PWM_in
ZD1
CVIN
CIOUT
D2
D3
CRT
BD83732HFP-M
BD83733HFP-M
DC_in
ZD2
RDCIN
RPBUS1
+B
CCRT
RCRT
DISC
PBUS
FIN
RPBUS2
RTHM
GND
Figure 1. Typical Application Circuit
○Product configuration: Silicon monolithic integrated circuit ○ The product is not designed for radiation resistance.
www.rohm.com
TSZ02201-0G1G0C700310-1-2
2016.Aug.25 Rev.003
© 2014 ROHM Co., Ltd. All rights reserved.
1/29
TSZ22111・14・001