1/3
Structure
Product series
Type
Silicon Monolithic Integrated Circuit
6ch Power Driver for CD-ROM,DVD-ROM
BD7998EFS
Function
・The spindle driver and the SLED driver can highly effective drive with PWM
drive system.
特
長
・The actuator driver and the loading driver are liner BTL drive system and are
achieving a low noise power.
○Absolute maximum ratings
Parameter
Symbol
Limits
Unit
V
SPVM1,2
SLRNF1,2
Vcc=SLVDD,AVM
DVcc
#1
POWER MOS power supply voltage
15
Preblock/BTL powerblock power supply voltage
PWM control block power supply voltage
Power dissipation
15
7
V
V
2
#
Pd
2.0
W
℃
℃
℃
Operating temperature range
Storage temperature
Topr
-40~85
-55~150
150
Tstg
Joint part temperature
Tjmax
#1 POWER MOS output terminals (17~20, 30, 33, 35pin) is contained.
#2 PCB (70mm×70mm×1.6mm,occupied copper foil is less than 3%,glass epoxy standard board) mounting.
Reduce power by 16mW for each degree above 25℃.
○Recommended operating conditions (Ta=-40~+85℃)
〔Set the power supply voltage taking allowable dissipation into considering〕
Parameter
Symbol
SPVM
SLVM
SLVDD=Vcc
AVM
MIN
-
TYP
MAX
-
Unit
V
#3
Spindle driver powerblock Power supply voltage
Sled motor driver powerblock Power supply voltage
Preblock / Loading driver powerblock Power supply voltage
Actuator driver powerblock Power supply voltage
PWM control block power supply voltage
Vcc
Vcc
12
#3
-
-
V
AVM
4.3
4.3
-
14
V
5.0
5.0
1.2
0.5
Vcc
6.0
V
DVcc
V
Spindle driver output current
Iosp
2.5 #4
A
Actuator/sled motor/loading motor driver output current
Ioo
-
0.8
A
#3 Set the same supply voltage to SPVM,SLVM and Vcc.
#4 The current is guaranteed 3.0A in case of the current is turned on/off in a duty-ratio of less than 1/10 with a maximum
on-time of 5msec
This product isn’t designed for protection against radioactive rays.
REV. A