Datasheet
Driver IC for PPC
High Performance, High Reliability
50V DC Brush Motor Drivers
for PPC's etc.
BD63150AFM
General Description
Key Specifications
BD63150AFM is a built-in channel H-bridge motor driver
for DC brush motor. This driver can facilitate low power
consumption by direct PWM or PWM constant current
control. There are built in protection circuits in this IC. It is
possible to output an abnormal detection signal for
Wired-OR that notifies each protection circuit operation,
which contributes to set high reliability.
Power Supply Voltage Range:
Rated Output Current:
Rated Output Current (Peak):
Operating Temperature Range:
Output ON-Resistance:
8.0V to 46.2V
5.0A
6.0A
-25°C to +85 °C
0.30Ω(Typ)
(Total of upper and lower resistors)
Features
Package
HSOP-M36
W(Typ) x D(Typ) x H(Max)
18.50mm x 9.90mm x 2.40mm
Single Power Supply Input (rated voltage of 50V)
Rated Output Current (peak): 5.0A(6.0A)
Low ON-Resistance DMOS Output
Forward, Reverse, Brake, Open
Power Save Function
External PWM Control
PWM Constant Current Control (current limit function)
Built-in Spike Noise Cancel Function (external noise
filter is unnecessary)
Driver for DC Brush Motor
Built-in logic input pull-down resistor
Cross-conduction Prevention Circuit
Output detection signal during abnormal states
(Wired-OR)
Figure 1. HSOP-M36
Thermal Shutdown Circuit (TSD)
Over-current Protection Circuit (OCP)
Under Voltage Lock out Circuit (UVLO)
Over Voltage Lock out Circuit (OVLO)
Ghost Supply Prevention (protects against malfunction
when power supply is disconnected)
HSOP-M36 package
Typical Application Circuit
GND
PS
VREF
IN1
IN2
Application
■ Plain Paper Copier (PPC), Multi-function Printer, Laser
Printer, Inkjet Printer, Photo Printer, FAX, Mini Printer
and etc.
FAILA
VCC
TEST
OUT1
OUT2
TEST1
RNF
RNFS
GND
Figure 2. Application Circuit
○Product structure:silicon monolithic integrated circuit ○This product has no designed protection against radioactive rays.
www.rohm.com
TSZ02201-0P2P0B301570-1-2
12.Oct.2017 Rev.001
© 2016 ROHM Co., Ltd. All rights reserved.
1/18
TSZ22111・14・001