BD2204GUL
Datasheet
Power Supply Selector Switch IC
for SD Cards
BD2204GUL
●Description
BD2204GUL is high side switch IC that has built-in 2
●Key Specifications
Input voltage range:
VIN1=2.7 to 4.5V
VIN2=1.2 to 2.4V
120mΩ(Typ.)
25μA(Typ.)
circuits of MOSFET. Switch has achieved 120mΩ
(Typ.) on-resistance. 3.3V power supply and 1.8V
power supply for memory card can be selected by SEL
terminal. Moreover, it has built-in simultaneous-on
prevention function at power switching, reverse-current
protection function to prevent reverse-current from
output terminal to input terminal at power-off, and
discharge circuit to discharge electricity in output
terminal.
ON resistance:
Operating current:
Standby current:
0.01μA(Typ.)
-40 to +85℃
Operating temperature range:
●Package
VCSP50L1
W(Typ.) D(Typ.) H (Max.)
1.50mm x 1.00mm x 0.55mm
●Features
Dual channel of low on resistance (Typ. = 120mΩ)
N-channel MOSFET built in
3.3V and 1.8V are chosen and an output is
possible.
0.5A Continuous Current load
Reverse-current protection when power switch off
Prevent VIN1 and VIN2 from simultaneous-on.
Output Discharge Circuit
Thermal Shutdown
Active-High Control Logic
VCSP50L1 package
VCSP50L1
●Applications
Digital cameras
Digital video camera
SD cards slot
●Typical Application Circuit
3.3V(Typ.)
VOUT
LOAD
VIN1
1.8V(Typ.)
CIN
CL
VIN2
EN
GND
SEL
Figure 1. Typical application circuit
○Product structure:Silicon monolithic integrated circuit ○This product is not designed protection against radioactive rays
www.rohm.com
TSZ02201-0E3E0H300030-1-2
07.Aug.2012 Rev.001
©
ROHM Co., Ltd. All rights reserved.
1/21
TSZ22111・14・001