Document 334R-1
SMT Broadband Conical Inductors
•ꢀ Full-lengthꢀcapꢀfullyꢀprotectsꢀtheꢀcoilꢀandꢀprovidesꢀaꢀlargeꢀ
surface for pick and place.
•ꢀ Theꢀselfꢀpositioningꢀmountingꢀbracketꢀhasꢀfourꢀsolderedꢀ
pads for excellent board adhesion.
•ꢀ Designedꢀspecificallyꢀforꢀbroadbandꢀandꢀhighꢀfrequencyꢀ
applications.
•ꢀ Operatesꢀasꢀaꢀseriesꢀofꢀnarrow-bandꢀinductorsꢀthroughoutꢀ
an operating frequency range of 10 MHz to 40 GHz.
•ꢀ Idealꢀforꢀuseꢀinꢀultra-widebandꢀbiasꢀT’s,ꢀwhereꢀtheꢀconicalꢀ
inductor provides the path for the DC bias injection or extrac-
tionꢀwhileꢀisolatingꢀtheꢀpowerꢀsourceꢀfromꢀtheꢀactiveꢀdevice.
•ꢀ Forꢀaꢀ“flyingꢀlead”ꢀversionꢀthatꢀallowsꢀadjustmentꢀofꢀtheꢀ
mounting angle consider the BCL series
Terminations Tin-silver-copper over silver-platinum-glass frit
Part
Inductance2
±±5 ꢀ(µH
DCR max
ꢀOhmsH
Irms3
number1
ꢀmAH
Otherꢀterminationsꢀavailableꢀatꢀadditionalꢀcost.
Weights BCR-122: 34 mg; BCR-531: 101 mg; BCR-802: 107 mg;
BCR-652: 472 mg
BCR-531JL_
BCR-122JL_
BCR-652JL_
BCR-802JL_
0.53
1.20
6.5
0.15
1.05
0.70
3.39
830
200
510
150
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
8.0
Resistance to soldering heat Maxꢀthreeꢀ40ꢀsecondꢀreflowsꢀatꢀ
1. When ordering, please specify packaging and termination codes:
BCR-802JLC
+260°C,ꢀpartsꢀcooledꢀtoꢀroomꢀtemperatureꢀbetweenꢀcycles
Moisture Sensitivity Level ꢀMSLHꢀ 1ꢀ(unlimitedꢀfloorꢀlifeꢀatꢀ<30°Cꢀ/ꢀ
85% relative humidity)
Termination: L = Tin-silver-copper over silver-platinum-glass frit
Special order, added cost:
Failures in Time ꢀFITH / Mean Time Between Failures ꢀMTBFH
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
S = Tin-lead over silver-platinum-glass frit
Packaging
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
BCR-122L: 500/7″ reel; 2000/13″ꢀreelꢀ Plasticꢀtape:ꢀ12ꢀmmꢀwide,ꢀ
0.36 mm thick, 8 mm pocket spacing, 3.51 mm pocket depth
BCR-±31L: 300/7″ reel; 1500/13″ꢀreelꢀ Plasticꢀtape:ꢀ12ꢀmmꢀwide,ꢀ
0.36 mm thick, 8 mm pocket spacing, 4.83 mm pocket depth
BCR-6±2L: 200/7″ reel; 750/13″ꢀreelꢀ Plasticꢀtape:ꢀ24ꢀmmꢀwide,ꢀ
0.33 mm thick, 12 mm pocket spacing, 6.45 mm pocket depth
BCR-802L: 300/7″ reel; 1500/13″ꢀreelꢀ Plasticꢀtape:ꢀ12ꢀmmꢀwide,ꢀ
0.36 mm thick, 8 mm pocket spacing, 4.83 mm pocket depth
tape
BCR-122JL: 500 parts per full reel;
BCR-531JL and BCR-802JL: 300 parts per full reel;
BCR-652JL: 200 parts per full reel
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
2. Inductance measured at 10 MHz, 0.1 Vrms, 0 Adc using an Agilent/HP
16193A fixture in an Agilent/HP 4287A LCR meter or equivalents.
3. Current that causes a 40°C temperature rise from 25°C ambient.
4. Electrical specifications at 25°C.
PCB washing Onlyꢀpureꢀwaterꢀorꢀalcoholꢀrecommended
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 334R-1 Revised 05/11/12
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2012
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.