CYW20736
Single-Chip Bluetooth Low Energy System-On-Chip
The Cypress CYW20736 is a an advanced Bluetooth Low Energy SoC that supports wireless charging profile. The CYW20736 is
designed to support the entire spectrum of Bluetooth Low Energy use cases for the medical, home automation, accessory, sensor,
Internet Of Things, and wearable market segments.
The CYW20736 radio has been designed to provide low power, low cost, and robust communications for applications operating in
the globally available 2.4 GHz unlicensed Industrial, Scientific, and Medical (ISM) band.
The single-chip Bluetooth low energy SoC is a monolithic component implemented in a standard digital CMOS process and requires
minimal external components to make a fully compliant Bluetooth device. The CYW20736 is available in a 32-pin, 5 mm × 5 mm
32-QFN package as well as WLCSP. CYW20736 device is supported in WICED SDK 2.x
Cypress Part Numbering Scheme
Cypress is converting the acquired IoT part numbers from Broadcom to the Cypress part numbering scheme. Due to this conversion,
there is no change in form, fit, or function as a result of offering the device with Cypress part number marking. The table provides
Cypress ordering part number that matches an existing IoT part number.
Table 1. Mapping Table for Part Number between Broadcom and Cypress
Broadcom Part Number
Cypress Part Number
BCM20736
CYW20736
BCM20736A1KML2G
BCM20736A1KWBGT
CYW20736A1KML2G
CYW20736A1KWBGT
Features
Applications
The following profiles are supported1 in ROM:
■ AirFuel wireless charging
■ Bluetooth Low Energy (BLE)-compliant
■ Infrared modulator
■ Battery status
■ Blood pressure monitor
■ Find me
■ IR learning
■ Supports Adaptive Frequency Hopping
■ Excellent receiver sensitivity
■ 10-bit auxiliary ADC with nine analog channels
■ Heart rate monitor
■ Proximity
■ Thermometer
■ Weight scale
■ Time
■ On-chip support for serial peripheral interface (master and
slave modes)
■ Broadcom Serial Communications interface (compatible with
Additional profiles that can be supported1 from RAM include:
NXP I2C slaves)
■ Blood glucose monitor
■ Temperature alarm
■ Location
■ Programmable output power control
■ Integrated ARM Cortex-M3 based microprocessor core
■ Automation Profile
■ Support for secure OTA
■ On-chip power-on reset (POR)
■ Support for EEPROM and serial flash interfaces
■ Integrated low-dropout regulator (LDO)
■ On-chip software controlled power management unit
■ Package type:
❐ 32-pin 32-QFN package (5 mm × 5 mm)
❐ 80-pin WLCSP package (2104 µm × 2085 µm)
■ RoHS compliant
1. Full qualification and use of these profiles may require FW updates from Cypress. Some of these profiles are under development/approval at the Cypress SIG and
conformity with the final approved version is pending. Contact your supplier for updates and the latest list of profiles.
Cypress Semiconductor Corporation
Document Number: 002-14883 Rev. *I
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised June 30, 2017