Emboss Tape
ZHCONNECTOR
1.5mm pitch/Disconnectable Crimp style connectors
Specifications –––––––––––––––––––
• Current rating: 1.0A AC, DC (AWG #26)
• Voltage rating: 50V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/20m Ω max.
After environmental testing/30m Ω max.
• Insulation resistance:
• Withstanding voltage: 500V AC/minute
• Applicable wire: AWG #32 to #26
• Applicable PC board thickness: 0.6 to 1.2mm,1.6mm
* RoHS compliant products are published.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
500M Ω min.
The ZH connector is very small with a
mounting height of 5.6mm and a thickness
of only 3.5mm. Contact retention lances on
the housing make insertion easier, while the
dimple at the center of the contact ensures
reliable contact with the post.
• Compact, low profile design
• Housing lances
Standards ––––––––––––––––––––––
0 Recognized E60389
• Reliable contact construction
• Distortion resistant construction
• Compatible with the ZR insulation
displacement connectors
1Certified LR20812
2R9351092
PC board layout and Assembly layout
〈Through-hole type (viewed from soldering side) 〉
Top entry type
Side entry type
1.5 ±0.05 1.5min
7.1
1.5 ±0.05 1.5min
3.5
φ0.7 ±0.03
4.6
φ0.7 ±0.03
Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers.
2. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should
be larger. The dimensions above should serve as a guideline. Contact JST for details.
〈SMT type (viewed from component side) 〉
SM2 type
SM4 type
Side entry type
Top entry type
Side entry type
(
)
1.5× N-1 +0.9
min 1.5±0.05
1.3±0.1
1.4±0.1
1.1±0.1
1.5±0.05
1.5±0.1
1.5±0.05
±0.05
0.7
0.9
φ1.1 +0.1
0
0.7min
0.7min
Note: 1. N...Number of circuits
2. Tolerances are non-cumulative: ±0.05mm for all centers.
3. The dimensions above should serve as a guideline. Contact JST for details.
16