AZ9621
10 AMP MINIATURE
PC BOARD RELAY
FEATURES
• Extremely low cost
• Epoxy sealed version available
• High temperature (105°C) version available
• Creepage/Clearance 4mm/3mm
• Class F insulation (155°C) standard
• UL, CUR file E44211
• VDE file pending
GENERAL DATA
Life Expectancy
Mechanical
Electrical
5 x 106
CONTACTS
5 x 104 at 10 A 250 VAC Res.
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Operate Time (Typical) 15 ms
Release Time (Typical) 15 ms
Ratings
Form A and C
(with no coil suppression)
2500 Vrms contact to coil
Max. switched power: 2500 VA
Max. switched current: 10 A AC
Max. switched voltage: 250 VAC
Dielectric Strength
(at sea level for 1 min.) 1000 Vrms across contacts
UL/CUR
1 Form A (standard temperature version)
10 A at 250 VAC, General Purpose, 50k cycles
Insulation Resistance 100 megohms min. at 500 VDC,
50% RH
1 Form A (high temperature version)
10 A at 250 VAC, General Purpose, 30k cycles
Dropout
Greater than 10% of nominal coil voltage
1 Form C (standard temperature version)
10 A (N.O.), 5 A (N.C.) at 250 VAC, General Purpose,
30k cycles
Ambient Temperature At nominal coil voltage
Operating
Storage
-40°C (-40°F) to 85°C (185°F) Std. Temp.
-40°C (-40°F) to 105°C (221°F) High Temp.
1 Form C (high temperature version)
10 A (N.O.), 4 A (N.C.) at 250 VAC, General Purpose,
30k cycles
-40°C (-40°F) to 155°C (311°F)
Vibration
>4g at 30-400 Hz
VDE
(pending)
1 Form A
10 A at 250 VAC, 30k cycles
1 Form C
Shock
>10g (functional)
>30g (destructive)
10 A (N.O.), 4 A (N.C.) at 250 VAC, 30k cycles
Enclosure
P.E.T. polyester
Tinned copper alloy, P.C.
260°C (500°F)
Material
Silver nickel
Terminals
Resistance
< 100 milliohms initially
(24 V, 1 A method)
Max. Solder Temp.
Max. Solder Time
5 seconds
Max. Immersion Time 30 seconds
Weight
5.6 g
COIL
Power
At Pickup Voltage
Max Continuous
Dissipation
200 mW
NOTES
1.8 W at 20°C (68°F)
1. All values at 20°C (68°F).
Temperature Rise
Temperature
33°C (59.4°F) at nominal coil voltage
Max. 155°C (311°F)
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Specifications subject to change without notice.
9/28/05W