AZ943
15 AMP
MINIATURE
PC BOARD RELAY
FEATURES
• High performance
• Low seated height
• Flux tight and sealed versions available
• Class F insulation (155°C) available
• UL, CUR file E43203
• TÜV file R2134654
CONTACTS
GENERAL DATA
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Life Expectancy
Mechanical
Electrical
1 x 106
1 x 105 at 10A 277 VAC Res.
Ratings
Form A and C
Max. switched power: 210 W or 2770 VA
Max. switched current: 15 A AC, 7 A DC
Max. switched voltage: 30 VDC or 300 VAC
Operate Time
Release Time
10 ms max.
5 ms max.
(with no coil suppression)
UL, CUR
1 Form A
15 A at 125 VAC, general use
10A at 277 VAC, general use, 100k cycles
TV - 5 120 VAC
Dielectric Strength
(at sea level for 1 min.) 1000 Vrms across contacts
1500 Vrms contact to coil
1/2 HP at 125 VAC
Insulation Resistance 100 megohms min. at 500 VDC,
50% RH
125 VA at 120 VAC Pilot Duty, 100k cycles (N.O.)
1 Form C
Dropout
Greater than 10% of nominal coil voltage
10 A at 277 VAC, general use, 100,000 cycles
1/2 HP at 125 VAC N.O.
Ambient Temperature At nominal coil voltage
Operating
Storage
-40°C(-40°F) to 70°C(158°F) class B
-40°C(-40°F) to 85°C(185°F) class F
125 VA at 120 VAC Pilot Duty, 100k cycles (N.O.)
TÜV
5 A at 250 VAC resistive, 100k cycles
12 A at 125 VAC resistive, 100k cycles
-40°C(-40°F) to 105°C(221°F)
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
10 g
Material
Silver tin oxide
Shock
Resistance
< 100 milliohms initally
(24 V, 1 A method)
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
Terminals
COIL
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Power
5 seconds
At Pickup Voltage
Max Continuous
Dissipation
203 mW
1.8 W at 20°C (68°F) Class B
2.4 W at 20°C (68°F) Class F
80°C (176°F)
Max. Immersion Time 30 seconds
Temperature Rise
Temperature
32°C (58°F) at nominal coil voltage
Weight
10 g
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
Packing unit in pcs
20 per plastic tube / 1000 per carton box
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2004-06-02