AZ920
ULTRA-SENSITIVE
SUBMINIATURE RELAY
FEATURES
• Extremely small footprint utilizing only 0.16 square inch
of PCB area
• Thin vertical profile only 0.2" wide
• Slim SIP package
• 1 Form A contact with up to 5 Amp switching capability
• High sensitivity, 58 mW pickup
• Dielectric strength 2500 Vrms contact to coil
• Bifurcated contacts available
• Epoxy sealed for automatic wave soldering
and cleaning
GENERAL DATA
• Class B (130°C) standard
Life Expectancy
Mechanical
Electrical
Minimum operations
20 million operations
1 X 105 at 5 A, 30 VDC or 250 VAC
• Class F (155°C) versions available
• UL,CUR file E43203
• TÜV file R50155999
Operate Time (typical) 6 ms at nominal coil voltage
CONTACTS
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Arrangement
Ratings
SPST (1 Form A), single button contact or bifurcated
Resistive load:
Dielectric Strength
1000 Vrms between open contacts
(at sea level for 1 min.) 2500 Vrms contact to coil
Max. switched power: 150 W or 1250 VA
Max. switched current: 5 A
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Max. switched voltage: 150* VDC or 250 VAC
5 A at 30 VDC or 250 VAC General Use, 100k cycles [1]
5 A at 30 VDC or 250 VAC Resistive, 100k cycles [1]
3 A at 30 VDC or 250 VAC General Use, 75k cycles [2]
3 A at 30 VDC or 250 VAC Resistive, 75k cycles [2]
UL Rating:
TÜV Rating
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
Storage
-40°C (-40°F) to 120°C (248°F)
-40°C (-40°F) to 130°C (266°F)
0.062" DA at 10–55 Hz
15 g
[1] Single button contacts
[2] Bifurcated contacts
Vibration
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Shock
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
Material
Silver nickel, silver tin oxide or silver cadmium oxide,
gold plating available
Terminals
Resistance
< 50 milliohms initially
(1 A, 6 VDC method)
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
5 seconds
80°C (176°F)
COIL
Max. Immersion Time 30 seconds
Power
At Pickup Voltage
(typical)
58 mW (5-18 V and 24 V sensitive coils)
88 mW (24 V coil)
Weight
3 grams
Max. Continuous
Dissipation
1.3 W at 20°C (68°F) ambient
NOTES
1. All values at 20°C (68°F).
Temperature Rise
12°C (22°F) at nominal coil voltage (5-18 V coils)
17°C (31°F) at nominal coil voltage (24 V coil)
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Temperature
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
10/30/09