AZ822
SUBMINIATURE
DIP RELAY
FEATURES
• Low profile for compact board spacing
• DC coils to 48 VDC
• Life expectancy to 10 million operations
• Standard PC 0.1" grid terminal spacing
• Fits standard 16 pin IC socket
• Epoxy sealed for automatic wave soldering and cleaning
• Meets FCC Part 68.302 1500 V lightning surge
• Meets FCC Part 68.304 1000 V dielectric
• UL, CUR file E43203
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 108
5 x 105 at 1 A 30 VDC
Operate Time (typical) 5 ms at nominal coil voltage
Release Time (typical) 2 ms at nominal coil voltage
CONTACTS
(with no coil suppression)
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
Capacitance (max.)
Contact to contact: 1.2 pF
Contact set to contact set: 1.6 pF
Contact to coil: 1.5 pF
Ratings
Resistive load:
Max. switched power: 60 W or 125 VA
Max. switched current: 2 A
Max. switched voltage: 220 VDC or 250 VAC
UL Rating: 1 A at 24 VDC
Bounce
(typical)
At 10 mA contact current
2 ms at operate N.O. side
3 ms at operate N.C. side
0.5 A at 120 VAC
Dielectric Strength
1000 Vrms contact to coil
(at sea level for 1 min.) 1000 Vrms contact to contact
Material
Silver palladium, gold clad
< 50 milliohms initially
1000 Vrms between contact sets
Resistance
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
Storage
-55°C (-67°F) to 90°C (194°F)
-55°C (-67°F) to 105°C (221°F)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Vibration
0.062" DA at 10–55 Hz
20 g
98 mW - Standard coils
74 mW - Sensitive coils
0.94 W at 20°C (68°F)
Shock
Enclosure
P.B.T. polyester (UL94 V-0)
Tinned copper alloy, P.C.
270°C (518°F)
Temperature Rise
Temperature
15°C (27°F) at nominal coil voltage
Max. 105°C (221°F)
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
5 seconds
80°C (176°F)
Max. Immersion Time 30 seconds
Weight 4.5 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay adjustment may be affected if undue pressure is exerted
on relay case.
4. Specifications subject to change without notice.
3/3/04W