AZ762P
20 A SPDT MINIATURE
POWER RELAY
FEATURES
• Latching relay
• Dielectric strength 4400 Vrms
• Epoxy sealed versions available
• 20 Amp switching
• High inrush current 500A / 2ms available
• UL, CUR le E44211
CONTACTS
GENERAL DATA
Arrangement
SPDT (1 Form C)
SPST (1 Form A, 1 Form B)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10 6
1 x 10 5 at 16 A 250 VAC Res.
Ratings
Resistive load:
Max. switched power: 5000 VA
Max. switched current: 20 A
Max. switched voltage: 277 VAC
Set Time (typical)
15 ms at nominal coil voltage
Reset Time (typical)
15 ms at nominal coil voltage
(with no coil suppression)
20A at 250 VAC, Resistive, 20k cycles [1]
16A at 250 VAC, Resistive, 100k cycles [1]
1.5 HP at 250 VAC, Motor, 6k cycles [1]
.5 HP at 120 & 250 VAC, Motor, 20k cycles (form A) [1]
TV-8 at 240VAC, 25k cycles (form A) [1]
Tungsten 1662W 6A at 277VAC, 6k cycles (form A) [1]
Tungsten 1800W 15A at 120VAC, 20k cycles
(form A) [1]
Rated Load
UL, CUR
Min. Pulse Time
Max Pulse Time
75ms
1 min.
Dielectric Strength
(at sea level for 1 min.)
4400 VAC coil to contact
1000 VAC between open contacts
Surge Voltage
Coil to Contact
Electronic ballast 1800W 15A at 120VAC, 20k cycles
(form A) [1]
10,000V (at 1.2x50 µ s)
Standard ballast 1662W 6A at 277VAC, 6k cycles
(form A) [1]
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Ambient Temperature
Operating
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
0°C (32°F) to 40°C (104°F)
‘T’ High Inrush Version (Form A 5.0mm Only)
3300W at 277VAC, Electronic Ballast, 20k cycles [2]
3000W at 220VAC, Tungsten, 6k cycles [2]
1500W at 347VAC, Std. Ballast, 20k cycles [2]
Storage
Vibration
0.062" DA at 10–55 Hz
10 g
Shock
Material
[1] Silver tin oxide, [2] Tungsten/Silver tin oxide
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Resistance
< 50 milliohms initially (at 1A, 24 VDC)
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Weight
COIL
80°C (176°F)
13 g
Power
At Pickup Voltage
(typical)
1 Coil: 256 mW
2 Coils: 384 mW
NOTES
Max. Continuous
Dissipation
1 Coil: 0.4 W
2 Coils: 0.6 W
1. All values at 23°C (73.4°F).
Temperature Rise
Max. Temperature
26°C (47°F) at nominal coil voltage
130°C (266°F)
2. Relay may pull in with less than “Must Operate” value.
3. Speci cations subject to change without notice.
4. Check the relay set/reset state before energizing the relay in
application.
11/17/15