AZ7 2 3
MINIATURE
POWER RELAY
FEATURES
• AC coils
• Dielectric strength 5000 Vrms
• Low cost
• Flux tight package
• 8 Amp switching - double pole contacts
• Isolation spacing greater than 8mm
• Molded materials: all 94V-0
• UL, CUR file E43203
• TÜV file R50008783
CONTACTS
GENERAL DATA
Arrangement
Ratings
DPDT (2 Form C)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 5 A 240 VAC Res.
Resistive load:
Max. switched power: 240 W, 2216 VA
Operate Time (typical) 8 ms at nominal coil voltage
Max. switched current: 8 A
Max. switched voltage: 150 VDC/400 VAC
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Inductive load: (cosØ =0.4)
Max. switched power: 90W or 500VA
Max. Switched current: 5A
Max. switched voltage: 125VDC or 400 VAC
Dielectric Strength
(at sea level for 1 min.) 3000 Vrms between contact sets
5000 Vrms coil to contact
1000 Vrms between open contacts
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Insulation
Resistance
1000 megohms min. at 20°C,
500 VDC 50% RH
Rated Load
UL, CUR
8 A 277 VAC, resistive
8 A 30 VDC resistive
1/3 HP 240 VAC
Dropout
Greater than 30%
of nominal coil voltage
Ambient Temperature At nominal coil voltage
TÜV
5 A at 250 VAC, resistive
5 A at 30 VDC, resistive
Operating
Storage
-40°C (-40°F) to 70°C (158°F)
-40°C (-40°F) to 105°C (221°F)
Material
Silver cadmium oxide
Vibration
0.062" DA at 10–55 Hz
10 g
Resistance
30 milliohms initially (6V, 1A method)
Shock
COIL
Enclosure
PC (94V-0)
Power
Terminals
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
At Pickup Voltage 576 mW
(typical)
Max. Solder Temp.
Max. Solder Time
Weight
Max. Continuous
Dissipation
1.5 W at 20°C (68°F) ambient
1.2 W at 40°C (104°F) ambient
17 grams
Temperature Rise 36°C (97°F) at nominal coil voltage
Temperature
Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
8/21/02W