AZ725
MINIATURE
POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms
• 20 Amp switching — single pole contacts
• Isolation spacing greater than 8mm
• Molded materials: all 94 V–0
• VDE 6010 - unsealed version only
• Sealed version available
• UL, CUR file E43203
CONTACTS
GENERAL DATA
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Life Expectancy
Mechanical
Electrical
Minimum operations
2 x 107
1 x 105 at 16 A 240 VAC Res.
Ratings
Resistive load:
Max. switched power: 480 W or 5000 VA
Max. switched current: 20 A
Max. switched voltage: 150* VDC or 400 VAC
Operate Time (typical) 7 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Rated Load
UL
20 A at 250 VAC resistive
Silver cadmium oxide
< 30 milliohms initially
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Material
Dropout
Greater than 10% of nominal coil voltage
Resistance
Ambient Temperature At nominal coil voltage
Operating
Storage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 130°C (266°F)
Vibration
0.062" DA at 10–55 Hz
10 g
COIL
Shock
Power
Enclosure
P.B.T. polyester
Tinned copper alloy
270°C (518°F)
5 seconds
At Pickup Voltage
(typical)
270 mW
Terminals
Max. Continuous
Dissipation
2.6 W at 20°C (68°F) ambient
2.0 W at 40°C (104°F) ambient
Max. Solder Temp.
Max. Solder Time
Temperature Rise
Temperature
32°C (58°F) nominal coil voltage
Max. 130°C (266°F)
Max. Immersion Time 30 seconds
Max. Solvent Temp
Weight
80°C (176°F)
19 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
5/16/05W