AZ699
SENSITIVE
SUBMINIATURE RELAY
FEATURES
• Extremely small (5mm)
• 6 Amp switching capability
• High sensitivity, 83 mW pickup
• Dielectric strength 4000 Vrms contact to coil
• Coils up to 48 VDC
• Epoxy sealed
• Clearance greater than 6 mm
• Creepage greater than 8 mm
• UL, CUR file E43203
• VDE file 40000296
CONTACTS
GENERAL DATA
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 X 107 operations
1 X 105 at 5 A, 250 VAC
Ratings
Resistive load:
Operate Time (typical) 5 ms at nominal coil voltage
Max. switched power: 150 W or 1500 VA
Max. switched current: 6 A
Max. switched voltage: 300 VDC* or 400 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
1000 Vrms between open contacts
Please contact the factory.
(at sea level for 1 min.) 4000 Vrms contact to coil
6000 V surge, contact to coil
Rated Load
UL, CUR
6 A at 250 VAC resistive
Insulation
100 megohms min. at 20°C, 500 VDC,
Resistance
50% RH
VDE
6 A at 250 VAC resistive
Dropout
Greater than 5% of nominal coil voltage
Material
Silver tin oxide, gold plating available
Ambient Temperature At nominal coil voltage
Resistance
< 100 milliohms initially (AgSnO2)
Operating
Storage
-40°C (-40°F) to 85°C (158°F)
< 30 milliohms initially (AgSnO2, gold plated)
-40°C (-40°F) to 105°C (221°F)
5 g at 10–500 Hz
10 g
Vibration
COIL
Shock
Enclosure
P.B.T. polyester 94V-0
Tinned copper alloy, P.C.
260°C (500°F)
Power
At Pickup Voltage
(typical)
83 mW
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Continuous
Dissipation
0.9 W at 20°C (68°F) ambient
5 seconds
Temperature Rise
Temperature
20°C (36°F) at nominal coil voltage
Max. 105°C (221°F)
80°C (176°F)
Max. Immersion Time 30 seconds
Weight
6 grams
NOTES
Packing unit in pcs
20 per plastic tube / 1000 per carton box
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Minimum permissible contact load:
AgSnO2 contact: 100 mA at 12 VDC
AgSnO2 contact with gold plating: 10 mA at 5 VDC
4. Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2004-08-11