AZ6991
SENSITIVE
SUBMINIATURE RELAY
FEATURES
• Extremely small footprint utilizing only 0.22 square inch
of PCB area
• Thin vertical profile only 0.196" wide, horizontal version
available
• 8 Amp switching capability
• High sensitivity, 95 mW pickup
• Dielectric strength 4000 Vrms contact to coil
• Coils to 60 VDC
• Epoxy sealed version for wave soldering and cleaning
available
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
10 million operations
3 X 104 at 6 A, 30 VDC or 250 VAC Res.
• Isolation spacing greater than 8 mm
• UL, CUR file E43203,
• VDE file 40020561
Operate Time (typical)
Release Time (typical)
8 ms at nominal coil voltage
4 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.)
1000 Vrms between open contacts
4000 Vrms contact to coil
CONTACTS
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Insulation
Resistance
100 megohms min. at 20°C, 500 VDC,
50% RH
Ratings
Resistive load:
Dropout
Greater than 10% of nominal coil voltage
Max. switched power: 180 W or 1662 VA
Max. switched current: 6 A
Max. switched voltage: 150* VDC or 400 VAC
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Ambient Temperature
Operating
At nominal coil voltage
-40°C (-40°F) to 85°C (158°F)
-40°C (-40°F) to 105°C (221°F)
Storage
Vibration
0.062" DA 10–55 Hz
10 g
Rated Load
UL/CUR
8A at 277 VAC resistive (Form A and C N.O.)
6A at 277 VAC resistive (Form C N.C.)
6A at 30 VDC resistive
Shock
Enclosure
P.B.T. polyester 94V-0
Tinned copper alloy, P.C.
260°C (500°F)
5 seconds
R300, B300 Pilot Duty
6A at 250 VAC resistive
6A at 30 VDC resistive
Silver nickel, Silver Tin
Optional gold plating
Terminals
VDE
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
Material
Resistance
< 50 milliohms initially (24 V voltage drop method)
80°C (176°F)
30 seconds
COIL
5.4 grams
Power
At Pickup Voltage
(typical)
95 mW
Max. Continuous
Dissipation
1.0 W at 20°C (68°F) ambient
Temperature Rise
Temperature
20°C (36°F) at nominal coil voltage
Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
2/23/12