AZ732
MINIATURE
POWER RELAY
FEATURES
• Dielectric strength 4000 Vrms coil to contact
• Isolation spacing greater than 8 mm
• Approvals/Standards include: UL, CSA, VDE, IEC,
SEMKO, CEE
• Double pole — Forms A, B, C, available
• 10 Amp switching
• SLIMPAK™ version saves board space
• Epoxy sealed version for automatic wave soldering and
cleaning
• UL file E44211; CSA file LR 85091;
VDE 4120–4940–4002/A1
CONTACTS
GENERAL DATA
Arrangement
Ratings
DPDT (2 Form C)
Resistive load:
Life Expectancy
Mechanical
Electrical
Minimum operations
30 million
1 x 105 at 10 A 30 VDC
1 x 105 at 10 A 115 VAC
Max. switched power: 300 W or 2770 VA
Max. switched current: 10 A, 51 A for 2 ms
Max. switched voltage: 150* VDC or 400 VAC
UL Rating:10 A at 30 VDC or 277 VAC
1/8 HP 120 VAC motor load
Operate Time (typical) 7 ms at nominal coil voltage
Release Time (typical) 2 ms at nominal coil voltage
(with no coil suppression)
*Note: If switching voltage is greater than 30VDC, special
precautions must be taken. Please contact the factory.
Dielectric Strength
4000 Vrms contacts to coil
(at sea level for 1 min.) 2500 Vrms contact to contact
Material
Silver cadmium oxide
1000 Vrms between open contacts
Resistance
< 30 milliohms initially
(at rated current, voltage drop method)
Insulation
Resistance
10,000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
COIL
Ambient Temperature At nominal coil voltage
Power
Operating
Standard: -55°C (-67°F) to 70°C (158°F)
At Pickup Voltage
(typical)
Standard coil: 337 mW
Sensitive coil: 250 mW
Sensitive: -55°C (-67°F) to 80°C (176°F)
Both: -55°C (-67°F) to 110°C (230°F)
Storage
Max. Continuous
Dissipation
1.9 W at 20°C (68°F) ambient
1.4 W at 40°C (104°F) ambient
Vibration
0.062" DA at 10–55 Hz
20 g
Shock
Temperature Rise
Standard: 40°C (72°F) at nominal coil
voltage
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Sensitive: 32°C (58°F) at nominal coil
voltage
Terminals
Temperature
Max. 110°C (230°F)
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
NOTES
80°C (176°F)
1. All values at 20°C (68°F).
Max. Immersion Time 30 seconds
Weight 20 grams
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Specifications subject to change without notice.
9/11/00W