AZ2704
RoHS compliant !
30 AMP POWER RELAY
FEATURES
• 30 Amp switching
• 30 Amp AC7a approved
• 900 Amp short circuit current (carrying)
• PC mount
• Dielectric strength 4000 Vrms
• Standard (2.4 mm) or
wide contact gap (3.0 mm) available
• UL, CUR file E44211
• TÜV certificate R50164753
CONTACTS
Arrangement
SPST (1 Form X)
DPST (2 Form X)
Ratings
Resistive load:
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A
Max. switched voltage: 300 VDC* or 400 VAC
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 106
* Note:If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
1 x 105 at rated load
Operate Time (typical) 30 ms at nominal coil voltage
Rated Load
UL
Release Time (typical) 30 ms at nominal coil voltage
30 A at 277 VAC, resistive, 30k cycles [1][2]
25 A at 277 VAC, resistive, 100k cycles [2]
25 A at 240 VAC, resistive, 100k cycles [1]
3 HP at 240 VAC, 6k cycles [1]
(with no coil suppression)
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 2000 Vrms between open contacts
1.5 HP at 120 VAC, 6k cycles [1]
TV-10 at 120 VAC, 6k cycles [1]
105 LRA / 20.5 FLA at 240 VAC, 100k cycles [1]
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
SPST (1 Form X)
Dropout
> 5% of nominal coil voltage (DC)
> 15% of nominal coil voltage (AC)
10 A at 120 VAC, tungsten, 6k cycles [1][2]
3 HP at 240 VAC, 100k cycles [2]
1.5 HP at 120 VAC, 100k cycles [2]
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 70°C (158°F) at nominal,
-40°C (-40°F) to 85°C (185°F) at 50%
or less of nominal (holding voltage).
DPST (2 Form X)
10 A at 277 VAC, tungsten, 6k cycles [2]
10 A at 120 VAC, tungsten, 6k cycles [1]
2 HP at 277 VAC, 75k cycles [2]
1 HP at 125 VAC, 30k cycles [2]
Vibration
Shock
0.062" DA at 10–55 Hz
Operating
10 g, 11 ms, 1/ sine (no false operation)
2
TÜV
27 A at 240 VAC, cos phi 0.8, 50k cycles [1][2]
25 A at 240 VAC, cos phi 0.4, 50k cycles [1][2]
Non-Operating 100 g, 11 ms, 1/ sine (no damage)
2
Enclosure
P.B.T. polyester
Material
Silver cadmium oxide [1], silver tin oxide [2]
Terminals
Tinned copper alloy, PC mount
270°C (518°F)
Resistance
< 100 milliohm initially
(24 V, 1 A voltage drop method)
Max. Solder Temp.
Max. Solder Time
COIL
5 seconds
Power
Weight
120 grams
At Pickup Voltage
(typical)
1.08 W (DC)
1.7 VA (AC)
Packing unit in pcs
16 per plastic tray / 80 per carton box
Max. Continuous
Dissipation
3.8 W at 20°C (68°F) ambient
NOTES
1. All values at 20°C (68°F).
Temperature Rise
Temperature
50°C (90°F) at nominal coil voltage
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Max. 130°C (266°F) - Class B
Max. 155°C (311°F) - Class F
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
fax:
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-08