AZ2703
30 AMP POWER RELAY
FEATURES
• 30 Amp switching
• 30 Amp AC7a approved
•
900 Amp Short circuit current (carrying)
• PC mount and quick connect terminals
• Dielectric strength 4000Vrms
• Standard (2.4mm) and wide contact
gap (3.0mm) available
• UL, CUR file E44211
• TÜV certifcate R50164753
CONTACTS
Arrangement
SPST (1 Form X)
DPST (2 Form X)
GENERAL DATA
Ratings
Resistive load:
Max. switched power: 840W (2X) or 8310VA (1X)
Max. switched current: 30A
Max. switched voltage: 150VDC* or 400VAC
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 106
1 x 105 at rated load
*Note: If switching voltage is greater than 30VDC, special
precautions must be taken. Please contact the factory.
Operate Time (max)
Release Time (max)
30ms at nominal coil voltage
Rated Load
UL, CUR
30A at 277VAC, resistive 30k cycles [1][2]
30ms at nominal coil voltage
(with no coil suppression)
25A at 277 VAC, resistive, 100k cycles [2]
25A at 240 VAC, resistive, 100k cycles [1]
3HP at 240 VAC, 6k cycles [1]
Dielectric Strength
(at sea level for 1 min.) 2000Vrms between open contacts
4000Vrms coil to contact
1.5HP at 120 VAC, 6k cycles [1]
TV-10 at 120 VAC, 6k cycles [1]
105 LRA / 20.5 FLA at 240 VAC, 100k cycles [1]
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
SPST (1 Form X)
Dropout
Greater than 5% of nominal coil voltage (DC)
Greater than 15% of nominal coil voltage (AC)
10A at 120 VAC, tungsten, 6k cycles [1][2]
3HP at 240 VAC, 100k cycles [2]
1.5HP at 120 VAC, 100k cycles [2]
Ambient Temperature At nominal coil voltage
Operating
Storage
-40°C (-40°F) to 85°C (185°F) - Class B
DPST (2 Form X)
-40°C (-40°F) to 105°C (221°F) - Class F
-40°C (-40°F) to 130°C (266°F) - Class B
-40°C (-40°F) to 155°C (311°F) - Class F
10A at 277 VAC, tungsten, 6k cycles [2]
10A at 120 VAC, tungsten, 6k cycles [1]
2HP at 277 VAC, 75k cycles [2]
1HP at 125 VAC, 30k cycles [2]
Vibration
Shock
0.062" DA at 10–55 Hz
27A at 240VAC, cos phi 0.8, 50k cycles [1][2]
25A at 240VAC, cos phi 0.4, 50k cycles [1][2]
TÜV
1
Operating
10g, 11ms, /2 sine (no false operation)
1
Material
[1] Silver cadmium oxide, [2] silver tin oxide
Non-Operating 100g, 11ms, /2 sine (no damage)
Resistance
< 100 milliohms initially
(24V, 1A voltage drop method)
Enclosure
Terminals
P.B.T. polyester
Tinned copper alloy, Quick connect tabs
Note: Allow suitable slack on leads when wiring, and do
not subject the terminals to excessive force.
COIL
Power
Weight (Approx)
120 grams
At Pickup Voltage
(typical)
1.08W (DC)
1.7VA (AC)
Max. Continuous
Dissipation
3.8 W at 20°C (68°F) ambient
NOTES
1. All values at 20°C (68°F).
Temperature Rise
Temperature
50°C (90°F) at nominal coil voltage
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Max. 130°C (266°F) - Class B
Max. 155°C (311°F) - Class F
2/09/16