Datasheet > ATSAMD10D13A-SSUT

ATSAMD10D13A-SSUT

更新时间： 2024-11-02 21:20:15

品牌	Logo	应用领域
美国微芯 - MICROCHIP		时钟微控制器光电二极管外围集成电路装置
页数	文件大小	规格书
20页	934K
描述
IC MCU 32BIT 8KB FLASH 20SOIC

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

ATSAMD10D13A-SSUT 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	包装说明：	SOP, SOP20,.4
Reach Compliance Code：	compliant	风险等级：	1.34
具有ADC：	YES	地址总线宽度：
位大小：	32	CPU系列：	CORTEX-M0
最大时钟频率：	48 MHz	DAC 通道：	YES
DMA 通道：	YES	外部数据总线宽度：
JESD-30 代码：	R-PDSO-G20	JESD-609代码：	e3
长度：	12.8 mm	低功率模式：	YES
湿度敏感等级：	1	DMA 通道数量：	6
外部中断装置数量：	8	I/O 线路数量：	18
端子数量：	20	计时器数量：	2
片上数据RAM宽度：	32	片上程序ROM宽度：	32
最高工作温度：	85 °C	最低工作温度：	-40 °C
PWM 通道：	YES	封装主体材料：	PLASTIC/EPOXY
封装代码：	SOP	封装等效代码：	SOP20,.4
封装形状：	RECTANGULAR	封装形式：	SMALL OUTLINE
峰值回流温度（摄氏度）：	250	电源：	1.8/3.3 V
认证状态：	Not Qualified	RAM（字节）：	4096
RAM（字数）：	1024	ROM（单词）：	2048
ROM可编程性：	FLASH	座面最大高度：	2.5 mm
速度：	48 MHz	子类别：	Microcontrollers
最大压摆率：	4.07 mA	最大供电电压：	3.63 V
最小供电电压：	1.62 V	标称供电电压：	3.3 V
表面贴装：	YES	技术：	CMOS
温度等级：	INDUSTRIAL	端子面层：	Matte Tin (Sn)
端子形式：	GULL WING	端子节距：	1.27 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	40
宽度：	7.5 mm	uPs/uCs/外围集成电路类型：	MICROCONTROLLER, RISC
Base Number Matches：	1

ATSAMD10D13A-SSUT 数据手册

浏览型号ATSAMD10D13A-SSUT的Datasheet PDF文件第2页

浏览型号ATSAMD10D13A-SSUT的Datasheet PDF文件第3页

浏览型号ATSAMD10D13A-SSUT的Datasheet PDF文件第4页

浏览型号ATSAMD10D13A-SSUT的Datasheet PDF文件第5页

浏览型号ATSAMD10D13A-SSUT的Datasheet PDF文件第6页

浏览型号ATSAMD10D13A-SSUT的Datasheet PDF文件第7页

Atmel SAM D10

SMART ARM-Based Microcontroller

DATASHEET SUMMARY

Description

The Atmel^®| SMART^™SAM D10 is a series of low-power microcontrollers using the 32-bit

ARM^®Cortex^®-M0+ processor, and ranging from 14- to 24-pins with up to 16KB Flash and 4KB of

SRAM. The SAM D10 devices operate at a maximum frequency of 48MHz and reach

2.46 Coremark/MHz. They are designed for simple and intuitive migration with identical

peripheral modules, hex compatible code, identical linear address map and pin compatible

migration paths between all devices in the product series. All devices include intelligent and

flexible peripherals, Atmel Event System for inter-peripheral signaling, and support for capacitive

touch button, slider and wheel user interfaces. The SAM D10 series is compatible to the other

product series in the SAM D family, enabling easy migration to larger device with added features.

The Atmel SAM D10 devices provide the following features: In-system programmable Flash, six-

channel direct memory access (DMA) controller, 6 channel Event System, programmable

interrupt controller, up to 22 programmable I/O pins, 32-bit real-time clock and calendar, two 16-

bit Timer/Counters (TC) and one 24-bit Timer/Counter for Control (TCC), where each TC can be

configured to perform frequency and waveform generation, accurate program execution timing or

input capture with time and frequency measurement of digital signals. The TCs can operate in 8-

or 16-bit mode, selected TCs can be cascaded to form a 32-bit TC, and one timer/counter has

extended functions optimized for motor, lighting and other control applications. The series provide

up to three Serial Communication Modules (SERCOM) that each can be configured to act as an

USART, UART, SPI, I²C up to 3.4MHz, SMBus, PMBus and LIN slave; up to 10-channel 350ksps

12-bit ADC with programmable gain and optional oversampling and decimation supporting up to

16-bit resolution, one 10-bit 350ksps DAC, two analog comparators with window mode,

Peripheral Touch Controller supporting up to 72 buttons, sliders, wheels and proximity sensing;

programmable Watchdog Timer, brown-out detector and power-on reset and two-pin Serial Wire

Debug (SWD) program and debug interface.

All devices have accurate and low-power external and internal oscillators. All oscillators can be

used as a source for the system clock. Different clock domains can be independently configured

to run at different frequencies, enabling power saving by running each peripheral at its optimal

clock frequency, and thus maintaining a high CPU frequency while reducing power consumption.

The SAM D10 devices have two software-selectable sleep modes, idle and standby. In idle mode

the CPU is stopped while all other functions can be kept running. In standby all clocks and

functions are stopped expect those selected to continue running. The device supports

SleepWalking. This feature allows the peripheral to wake up from sleep based on predefined

conditions, and thus allows the CPU to wake up only when needed, e.g. when a threshold is

crossed or a result is ready. The Event System supports synchronous and asynchronous events,

allowing peripherals to receive, react to and send events even in standby mode.

The Flash program memory can be reprogrammed in-system through the SWD interface. The

same interface can be used for non-intrusive on-chip debug and trace of application code. A boot

loader running in the device can use any communication interface to download and upgrade the

application program in the Flash memory.

The Atmel SAM D10 devices are supported with a full suite of program and system development

tools, including C compilers, macro assemblers, program debugger/simulators, programmers and

evaluation kits.

Atmel-42242HS-SAM-D10-Summary_09/2016

SMART

12 3 4 5 6 7...20

中文翻译

下载PDF

与ATSAMD10D13A-SSUT相关器件

型号	品牌	获取价格	描述	数据表
ATSAMD10D14	MICROCHIP	获取价格	A low-power, high-performance ARM? Cortex?-M0+ based flash microcontroller, the Microchip'
ATSAMD10D14A-MUT	MICROCHIP	获取价格	IC MCU 32BIT 16KB FLASH 24QFN
ATSAMD10-XMINI	MICROCHIP	获取价格	EVAL KIT FOR SAMD10
ATSAMD11C14	MICROCHIP	获取价格	A low-power, high-performance ARM? Cortex?-M0+ based flash microcontroller, the Microchip'
ATSAMD11D14	MICROCHIP	获取价格	A low-power, high-performance ARM? Cortex?-M0+ based flash microcontroller, the Microchip'
ATSAMD11-XPRO	MICROCHIP	获取价格	EVAL KIT FOR SAMD11
ATSAMD20E14	MICROCHIP	获取价格	A low-power, high-performance Microchip's ARM? Cortex?-M0+ based flash microcontroller, th
ATSAMD20E14A-AU	ATMEL	获取价格	ARM-Based Microcontroller
ATSAMD20E14A-AUT	ATMEL	获取价格	ARM-Based Microcontroller
ATSAMD20E14A-MU	ATMEL	获取价格	ARM-Based Microcontroller

与ATSAMD10D13A-SSUT相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

6
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

3
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

23
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

24

产品中心

服务支持

精选活动

关于我们

帮助中心

ATSAMD10D13A-SSUT

ATSAMD10D13A-SSUT 技术参数

ATSAMD10D13A-SSUT 数据手册

与ATSAMD10D13A-SSUT相关器件

与ATSAMD10D13A-SSUT相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ATSAMD10D13A-SSUT

ATSAMD10D13A-SSUT 技术参数

ATSAMD10D13A-SSUT 数据手册

与ATSAMD10D13A-SSUT相关器件

与ATSAMD10D13A-SSUT相关文章

您还可以找

您在本页遇到什么问题？