ATS17501
Dual Output Differential Speed and Direction Sensor IC
FEATURES AND BENEFITS
DESCRIPTION
• High-speed switching bandwidth up to 40 kHz
• Two independent output channels with options for high
resolution XOR speed, pulse, and direction protocol
• ASIL B(D) compliant (ISO 26262), assessment pending
• Optional fault detection output protocol
• Immune to common external magnetic disturbance
• EEPROM enables factory traceability throughout product
life cycle
TheATS17501 is a single IC solution designed for rotational
position sensing of a ferrous gear target found in automotive
and industrial electric motor applications (often with specific
application and safety requirements). The IC is housed in an
SG package that incorporates a rare-earth magnetic pellet for
ease of manufacturing, consistent application performance
over temperature, and enhanced reliability.
ThreeHallelementsareincorporatedtocreatetwoindependent
differential channels. These inputs are processed by digital
circuits and robust algorithms designed to eliminate the
detrimental effects of magnetic and system offsets, and to
address false output transitions caused by target vibrations
in electric motors at startup and low speed operation. The
differential signals are used to produce a highly accurate
speed output and, if desired, provide information on the
direction of rotation.
• Ideally suited for asynchronous electric motor applications
2
-
Advanced calibration techniques are used to optimize signal
offset and amplitude. This calibration, combined with the
digital tracking of the signal, results in accurate switch points
over air gap, speed, and temperature.
PACKAGE:
The IC can be programmed for a variety of applications
requiring dual-phase gear speed and position signal
information or simultaneous high-resolution gear speed
and direction information. It can be configured to enable
Fault Detection mode for ASIL B(D) utilization (assessment
pending).
4-Pin SIP
(suffix SG)
The ATS17501 SG package is a lead (Pb) free 4-pin SIP
package with an integrated back-biasing magnet and a 100%
matte-tin-plated lead frame.
Not to scale
Functional Block Diagram
Analog
Regulator
EEPROM
VCC
Diagnostics
Digital
Regulator
Temperature
Sensor
OUTA
Digital
Controller
Oscillator
Hall
Elements
Analog
Gain
OUTB
GND
ADC
Filter
Analog
Filter
Gain
ADC
ATS17501-DS, Rev. 2
MCO-0000734
March 19, 2020
Advance Information Datasheet • Subject to Change Without Notice