Sample &
Buy
Support &
Community
Reference
Design
Product
Folder
Tools &
Software
Technical
Documents
ATL431, ATL432
SLVSCV5C –MARCH 2015–REVISED SEPTEMBER 2015
ATL43x 2.5-V Low Iq Adjustable Precision Shunt Regulator
1 Features
3 Description
The ATL431 and ATL432 are three-terminal
1
•
•
Adjustable Regulated Output of 2.5 V to 36 V
Very-Low Operating Current
adjustable shunt regulators, with specified thermal
stability over applicable automotive, commercial, and
industrial temperature ranges. The output voltage can
be set to any value between Vref (approximately
2.5 V) and 36 V, with two external resistors. These
devices have a typical output impedance of 0.05 Ω.
Active output circuitry provides a very sharp turn-on
characteristic, making these devices excellent
replacements for Zener diodes in many applications,
such as onboard regulation, adjustable power
supplies, and switching power supplies.
–
–
IKA(min) = 35 µA (Max)
IREF = 150 nA (Max)
•
•
Internally Compensated for Stability
Stable With No Capacitive Load
Reference Voltage Tolerances at 25°C
–
–
–
0.5% for ATL43xB
1% for ATL43xA
•
Typical Temperature Drift
The ATL43x has > 20x improvement cathode current
range over it's TL43x predecessor. It also is stable
with a wider range of load capacitance types and
values.
–
–
5 mV (–40°C to 85°C); I Version
6 mV (–40°C to 125°C); Q Version
•
•
Extended Cathode Current Range
35 µA to 100 mA
ATL431 and ATL432 are the exact same parts but
with different pinouts and order numbers. The
ATL43x is offered in two grades, with initial
tolerances (at 25°C) of 0.5%, 1%, for the B and A
grade, respectively. In addition, low output drift vs
temperature ensures good stability over the entire
temperature range.
Low Output Impedance of 0.3 Ω (Max)
2 Applications
•
•
•
•
•
•
Secondary Side Regulation in Flyback SMPSs
Industrial, Computing, Consumer, and Portables
Adjustable Voltage and Current Referencing
Power Management
The ATL43xxI devices are characterized for operation
from –40°C to 85°C, and the ATL43xxQ devices are
characterized for operation from –40°C to 125°C.
Power Isolation
Device Information(1)
Zener Replacement
PART NUMBER
ATL431
ATL432
PACKAGE
BODY SIZE (NOM)
SOT (3)
2.90 mm × 1.60 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Schematic
Stability Region for VKA = 15.0 V
2000
Input
V
KA
I
KA
1000
V
ref
STABLE
100
20
0.0001
0.001
0.01
CKA(PF)
0.1
1
10
D001
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.