Datasheet > ATG-2142-R/Q

ATG-2142-R/Q

更新时间： 2024-11-07 02:33:55

品牌	Logo	应用领域
爱模 - MSYSTEM		/
页数	文件大小	规格书
4页	142K
描述
Limit Alarms (potentiometer adj.) A-UNIT

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

ATG-2142-R/Q 数据手册

MODEL: B3FP

Space-saving Two-wire Signal

Conditioners B3-UNIT

[1] OPTIONS (multiple selections)

Standards & Approvals

blank: CE marking

/UL: UL approval, CE marking

Other Options

FREQUENCY TRANSMITTER

(field-configurable)

blank: none

Functions & Features

/Q: Option other than the above (specify the specification)

• Converts the output from a pulse-type transducer

into a 4 – 20 mA DC signal

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

• DIP switch configurable input range

• Monitor terminals

• High-density mounting

/C02: Polyurethane coating

/C03: Rubber coating (UL not available)

18 (.71)

GENERAL SPECIFICATIONS

Construction: Small-sized front terminal structure

Connection: Euro type connector terminal

106

(4.17)

(applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm)

Housing material: Flame-resistant resin (gray)

Isolation: Input to output

DIP/rotary switches: For input calibration

(Refer to the instruction manual)

110.5

(4.35)

mm (inch)

Noise filter: Chattering protection filter selectable with DIP

switches (time constant 1 msec.)

Pulse sensing: DC coupled or capacitor coupled selectable

with DIP SW

MODEL: B3FP[1]

ORDERING INFORMATION

• Code number: B3FP[1]

INPUT SPECIFICATIONS

Measurable frequencies: 0 – 0.01 Hz through 100 kHz; Sine

waves with frequencies lower than 0.1 Hz cannot be

detected with capacitor coupling.

Specify a code from below for [1].

(e.g. B3FP/UL/Q)

• Specify the specification for option code /Q

(e.g. /C01)

Pulse width time requirement: Min. 4 μsec. for both H and L

levels

DC offset: Selectable within the maximum voltage for

respective pulse amplitude setting.

• Orders will be shipped with default factory settings as

shown below.

(e.g. For the amplitude 2 Vp-p with the maximum voltage

10 V, DC offset can be as low as -9 V and as high as +9 V.)

Frequency offset: Selectable up to 50 % of the full-scale

frequency.

• Factory default setting:

Input type: Voltage pulse

Frequency range: 0 – 1000 Hz

Pulse amplitude: 5 Vp-p

DC offset: 2.5 V

■ Open Collector

Sensing voltage/current: Approx. 2.5 V DC @ 1mA

Detecting levels: ≤ 750 Ω / 0.7 V for ON;

≥ 3.0 kΩ / 1.3 V for OFF

Pulse sensing: DC coupled

Noise filter: None

Detecting level: High (2 V)

■ Voltage Pulse

Waveform: Square or sine

Input impedance: 10 kΩ min.

INPUT – Field-selectable

Open collector

Input amplitude: Min. 0.1 V p-p, max. 200 Vp-p

Max. voltage between input terminals: 100 V

(Max. voltage across the input terminals: 70 V for conform

with EU Directive; 30 V rms, 42.4 V peak or 60 V DC for UL

approval)

Voltage pulse

Two-wire current pulse

B3FP SPECIFICATIONS

ES-7516 Rev.9 Page 1/4

https://www.m-system.co.jp/

12 3 4

中文翻译

下载PDF

与ATG-2142-R/Q相关器件

型号	品牌	获取价格	描述	数据表
ATG-2142-S	MSYSTEM	获取价格	Limit Alarms (potentiometer adj.) A-UNIT
ATG-2142-S/Q	MSYSTEM	获取价格	Limit Alarms (potentiometer adj.) A-UNIT
ATG-2142-V	MSYSTEM	获取价格	Limit Alarms (potentiometer adj.) A-UNIT
ATG-2142-V/Q	MSYSTEM	获取价格	Limit Alarms (potentiometer adj.) A-UNIT
ATG-2143-B	MSYSTEM	获取价格	Limit Alarms (potentiometer adj.) A-UNIT
ATG-2143-B/Q	MSYSTEM	获取价格	Limit Alarms (potentiometer adj.) A-UNIT
ATG-2143-C	MSYSTEM	获取价格	Limit Alarms (potentiometer adj.) A-UNIT
ATG-2143-C/Q	MSYSTEM	获取价格	Limit Alarms (potentiometer adj.) A-UNIT
ATG-2143-P	MSYSTEM	获取价格	Limit Alarms (potentiometer adj.) A-UNIT
ATG-2143-P/Q	MSYSTEM	获取价格	Limit Alarms (potentiometer adj.) A-UNIT

与ATG-2142-R/Q相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

14
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

12
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

36
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

33

产品中心

服务支持

精选活动

关于我们

帮助中心

ATG-2142-R/Q

ATG-2142-R/Q 数据手册

与ATG-2142-R/Q相关器件

与ATG-2142-R/Q相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ATG-2142-R/Q

ATG-2142-R/Q 数据手册

与ATG-2142-R/Q相关器件

与ATG-2142-R/Q相关文章

您还可以找

您在本页遇到什么问题？