ATF1504ASV/ATF1504ASVL
1.0
ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings (†)
Temperature under bias............................................................................................................................-40°C to +85°C
Storage temperature ...............................................................................................................................-65°C to +150°C
Voltage on any pin with respect to ground(1).............................................................................................. -2.0V to +7.0V
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
Note 1: Minimum voltage is -0.6V DC, which may undershoot to -2.0V for pulses of less than 20 ns. Maximum
output pin voltage is VCC + 0.75V DC, which may overshoot to 7.0V for pulses of less than 20 ns.
TABLE 1-1:
DC AND AC OPERATING CONDITIONS
Industrial
Operating Temperature (Ambient)
VCC (VCCIO/VCCINT) Power Supply
-40°C to +85°C
3.0V to 3.6V
TABLE 1-2:
Symbol
DC CHARACTERISTICS
Parameter Minimum Typical
Maximum
Units
Condition
IIL
Input or I/O Low Leakage
Current
—
—
-40
—
—
—
—
-2
-10
10
40
—
—
5
µA VIN = GND
IIH
Input or I/O High Leakage
Current
2
µA VIN = VCC
IOZ
ICC1
Tri-State Output Off-State
Current
—
75
5
µA VO = VCC or GND
Power Supply Current,
Standby
mA VCC = Max
VIN = 0, VCC
Std power
“L” power
“PD” mode
Std power
µA VCC = Max
VIN = 0, VCC
ICC2
Power Supply Current,
Power-Down mode
0.1
55
mA VCC = Max
VIN = 0, VCC
ICC3(1) Reduced Power mode
—
mA VCC = Max
VIN = 0, VCC
Supply Current, Standby
VIL
Input Low Voltage
Input High Voltage
-0.3
1.7
—
—
—
—
0.8
VCCIO + 0.3
0.45
V
V
VIH
VOL
Output Low Voltage
(3.3V TTL)
V
V
V
V
VIN = VIH or VIL
VCCIO = Min, IOL = 8 mA
Output Low Voltage
(3.3V CMOS)
—
2.4
—
—
—
0.2
—
VIN = VIH or VIL
VCCIO = Min, IOL = 0.1 mA
VOH
Output High Voltage
(3.3V TTL)
VIN = VIH or VIL
VCCIO = Min, IOH = -1.5 mA
Output High Voltage
(3.3V CMOS)
VCCIO - 0.2
—
VIN = VIH or VIL
VCCIO = Min, IOH = -0.1 mA
Note 1: When macrocell reduced-power feature is enabled.
2019 Microchip Technology Inc.
DS20006185A-page 8