Digital Attenuator, 15 dB, 4-Bit,
TTL Driver, DC - 3 GHz
V 3.00
Features
CR-11
n
Attenuation: 1 dB steps to 15 dB
n
Temperature Stability: ± 0.18 dB from –55°C to +85°C
Typical
n
n
n
n
Low DC Power Consumption
Hermetic Surface Mount Package
Integral TTL Driver
50 Ohms Nominal Impedance
Description
M/A-COM’s AT-213 is a 4-bit, 1 dB step digital attenuator
in a hermetically sealed ceramic 16-lead surface mount
package. The AT-213 is ideally suited for use where high
accuracy, fast switching, very low power consumption and
low intermodulation products are required.
Typical
applications include dynamic range setting in a precision
receiver circuits and other gain/leveling control circuits.
Environmental screening is available. Contact the factory
for information.
Electrical Specifications: TA = -55°C to +85°C 1
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
Reference Insertion Loss
—
DC - 0.5 GHz
DC - 1.0 GHz
DC - 2.0 GHz
DC - 3.0 GHz
dB
dB
dB
dB
—
—
—
—
—
—
—
—
1.7
1.9
2.2
2.5
Attenuation Accuracy 2
Any Single Bit
DC - 2.0 GHz
DC - 3.0 GHz
± (0.15 dB +3% of atten setting in dB) dB
± (0.2 dB +3% of atten setting in dB) dB
Or ± 0.4 dB, whichever is greater
Any Combination of Bits
DC - 2.0 GHz
DC - 3.0 GHz
± (0.2 dB +3% of atten setting in dB) dB
± (0.2 dB +3% of atten setting in dB) dB
Or ± 0.4 dB, whichever is greater
VSWR
Trise, Tfall
—
—
—
—
—
Ratio
ns
—
—
—
—
—
9
1.6:1
—
10% to 90%
Ton, Toff
50% Control to 90/10% RF
In-Band (peak-peak)
ns
40
30
—
Transients
mV
—
1 dB Compression
Input Power
Input Power
0.05 GHz
0.5 - 3.0 GHz
dBm
dBm
—
—
+22
+28
—
—
Input IP3
Input IP2
For two-tone Input Power
Up to +5 dBm
0.05 GHz
0.5 - 3.0 GHz
dBm
dBm
—
—
+40
+50
—
—
For two-tone Input Power
Up to +5 dBm
0.05 GHz
0.5 - 3.0 GHz
dBm
dBm
—
—
+45
+68
—
—
Vcc
Vee
—
—
—
—
V
V
4.5
5.0
—
5.5
-8.0
-5.0
1. All specifications apply when operated with bias voltages of +5V for Vcc and –5.0V for Vee.
2. This attenuator is guaranteed monotonic.