0805CHIPINDUCTORS
Outgassing Compliant Chip Inductors AS336RAD
TheAE336RADinductorsprovideexceptionalQvalues,
evenathighfrequencies. Theyhaveaceramicbodyand
wire wound construction to provide the highest SRFs,
tight inductance tolerance and batch consistency.
features high temperature materials that pass NASA low
outgassing specifications and allow operation in ambi-
ent temperatures up to 155°C.The leach-resistant base
metalization with tin-lead (Sn-Pb) terminations ensures
the best possible board adhesion.
ThisrobustversionofCoilcraft’sstandard0805HQseries
Inductance2
(nH)
Percent
tolerance
SRF min4
(GHz)
DCRmax5
(Ohms)
Imax
(A)
Part number1
Q min3
AS336RAD2N5JSZ
AS336RAD5N6JSZ
AS336RAD6N2JSZ
AS336RAD12NJSZ
AS336RAD16N_SZ
2.5 @ 250 MHz
5.6 @ 250 MHz
6.2 @ 250 MHz
12 @ 250 MHz
16 @ 250 MHz
5
5
5
5
56 @ 1000 MHz
83 @ 1000 MHz
80 @ 1000 MHz
52 @ 500 MHz
72 @ 500 MHz
>5.00
4.88
4.55
2.80
2.40
0.020
0.035
0.035
0.045
0.060
2.0
1.9
1.8
1.6
1.4
5,2
AS336RAD18N_SZ
AS336RAD20N_SZ
AS336RAD27N_SZ
AS336RAD30N_SZ
AS336RAD39N_SZ
18 @ 250 MHz
20 @ 250 MHz
27 @ 250 MHz
30 @ 250 MHz
39 @ 250 MHz
5,2
5,2
5,2
5,2
5,2
70 @ 500 MHz
54 @ 250 MHz
58 @ 250 MHz
50 @ 250 MHz
53 @ 250 MHz
2.20
2.05
2.00
1.74
1.60
0.060
0.060
0.070
0.095
0.110
1.4
1.4
1.3
1.1
1.0
AS336RAD48N_SZ
AS336RAD51N_SZ
48 @ 200 MHz
51 @ 200 MHz
5,2
5,2
44 @ 150 MHz
36 @ 150 MHz
1.40
1.28
0.095
0.120
1.1
0.9
1. When ordering, please specify tolerance and testing codes:
Core material Ceramic
Terminations Tin-lead (63/37) over silver-platinum-glass frit
AS336RAD51NGSZ
Ambient temperature –55°C to +125°C with Imax current, +125°C
to +155°C with derated current
Tolerance: G = 2% J = 5%
Testing:
Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10003
Storage temperature Component: –55°C to +155°C.
Packaging: –55°C to +80°C
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286 impedance analyzer or equivalent with Coilcraft-provided correla-
tion pieces.
3. Q measured at the same frequency as inductance using an Agilent/HP
4291A with an Agilent/HP 16197 test fixture or equivalents.
4. SRF measured using an Agilent/HP 8753ES network analyzer or
equivalent and a Coilcraft SMD-D test fixture.
5. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a
Coilcraft CCF858 test fixture.
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +155 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 2000 per 7″ reel
Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing,
1.65 mm pocket depth
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
These parts are preproduction products for electrical evaluation only.
Specification subject to change without notice.
®
Document AS197-1 Revised 03/10/11
Phone 800-981-0363
Fax 847-639-1508
E-mail cps@coilcraft.com
Web www.coilcraft-cps.com
1102 Silver Lake Road
Cary IL 60013
© Coilcraft, Inc. 2011