Bluetooth® Module
Class 2 - Data - 1mW - 2.41/2.48GHz
ꢀ Technical specifications
Features
•
Bluetooth 2.1 stack (Chipset CSR Bluecore4-Ext)
Baseband - Link Manager - L2CAP - RFCOMM - SDP - SCO
Data profiles: SPP - OPP - DUN
•
Performance
•
•
•
•
•
Frequency: FHSS / 2.402 to 2.480GHz
Radiated RF power: 2mW with integrated antenna
RF sensitivity: -86dBm (BER 10-3)
Range: up to 30m
Air rate: up to 3Mbps EDR
Power consumption & requirements
•
•
•
•
Operating voltage: 3.3V typ (from 2.85V to 3.6V)
Max TX consumption: 60mA
Typical RX consumption: 40mA
Bluetooth® Module
Standby consumption: 1 to 6mA
This miniature module (22 x 14 x 3 mm) allows a two-way Bluetooth®
data transmission, up to 30m.
Interfaces
•
•
•
UART with flow control
PCM
It uses the 2.45GHz frequency world band.This module is Bluetooth® V2
certified under the «End Product» category, allowing customers integrating
our solution, to use the Bluetooth® label.
UART programmable speed: from 9.6 to 921.6kbps
General information
•
•
•
•
Operating temperature: -40°C / +85°C
Dimensions: 22 x 14 x 3 mm
Standards: EN 300-328 / EN 301-489 / FCC part 15 / IC
Mounting: SMD
The data transmission and configuration are done via an UART serial interface
«TTL» type. The radio rate goes from 723kbps to 3Mbps EDR. The miniature
antenna is integrated (RF pin version also available).
In «Data» mode, the embedded SPP profile allows the module to establish
a wireless serial link to a PDA, laptop, mobile phone or other device equipped
with a Bluetooth® function. OPP profile allows you to send files to a Blue-
tooth® system.
ꢀ Pin configuration & Dimensions
ꢀ References
ARF7678AA BTC2-DATA Bluetooth® Module - Integrated antenna
ARF7678BA BTC2-DATA Bluetooth® Module - RF out pin
Modules Bluetooth® Class2
283 rue Louis Néel - Parc technologique Pré Roux - 38920 CROLLES - France
Tél. : +33 (0)4 76 92 07 77 - Fax : +33 (0)4 76 04 80 87 - E-mail : arf@adeunis-rf.com - www.adeunis-rf.com