APW7046
Dual Advanced PWM and Source-Sink Linear Controller
Features
General Description
The APW7046 provides the power controls and protec-
tions for three output voltages on AGP/PCI Graphic Card
•
3 Regulated Voltages are provided
− Standard Buck Converter for VCORE
(1.15~1.50V)
applications. It integrates two PWM controllers , one
SOURCE-SINK linear controller, as well as the monitor
and protection functions into a single package. One PWM
converter (PWM1) supplies the VCORE(1.5V) for the GPU
with a standard buck converter. The other standard buck
converter (PWM2) regulates the VMEM(2.5V) for the pow-
er of DDR memory. The SOURCE-SINK linear controller
control two external MOSFETs to be a linear regulator
with the capability of sourcing and sinking current. It reg-
ulates the VTT (1.25V) power for DDR Termination voltage.
− Standard Buck Converter for VMEM
(2.40~3.15V)
−Linear Controller with SOURCE-SINK Regul-
ation for VTT(1.25V)
•
•
Simple Single-Loop Control Design
− Voltage-Mode PWM Control
Excellent Output Voltage Regulation
− VCORE Output : ±1% Over Temperature
− VMEM Output : ±1.5% Over Temperature
− VTT Output : 1/2 VIN ±25mV Over Tempera-
ture Min. VIN = 1.7V
Additional built-in over-voltage protection (OVP) will be
started when the VCORE or VMEM output is above 115%
of each DAC setting (VCORE and VMEM). OVP function will
shutdown the all output voltages until re-powering on the
IC. For each PWM converter, the over-current function
monitors the output current by sensing the voltage drop
across the MOSFET‘s rDS(ON) , eliminating the need for a
current sensing resistor.
•
Fast Transient Response
− Built-in Feedback Compensation
− Full 0% to 100% Duty Ratio
Over-Voltage and Over-Current Fault Monitor
Constant Frequency Operation(200kHz)
24 pins, SOIC Package
•
•
•
Pin Description
VCC
UGATE1
PHASE1
SS
BOOT
24
1
2
23 UGATE2
22 PHASE2
21 PGND
3
Applications
4
SD
5
20 MEM2
19 MEM1
SOURCE
SINK
6
•
•
•
M/B DDR Power Regulation
AGP/PCI Graphics Power Regulation
SSTL-2 Termination
7
18
17
16
15
14
13
MEM0
8
FB
CORE2
CORE1
CORE0
OCSET2
VSEN2
9
VIN
10
11
12
OCSET1
VSEN1
GND
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
Copyright
ANPEC Electronics Corp.
1
www.anpec.com.tw
Rev.A.2 - Mar., 2002