CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Radial Lead
PSC
Low profile
Lower ESR
Super low ESR, high temperature resistance and high ripple current capability
Rated voltage range : 2.5 to 16Vdc
@
@
@
@
PSA
Endurance : 2,000 hours at 105
C
Suitable for DC-DC converters, voltage regulators and decoupling applications
for computer motherboards
@RoHS Compliant
Lower ESR
PS
SPECIFICATIONS
?
Items
Characteristics
Category
Temperature Range
-55 to +105C
Rated Voltage Range 2.5 to 16Vdc
Capacitance Tolerance P20% (M)
(at 20C, 120Hz)
(at 105C)
Surge Voltage
Leakage Current
*Note
Rated voltageB1.15
I=0.2CV
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (Vdc)
(at 20C after 2 minutes)
(at 20C, 120Hz)
Dissipation Factor
(tane)
0.08 max. (FA5 size : 0.12max.)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Z(
-
25C)/Z(+20C)[1.15
Z(-
55C)/Z(+20C)[1.25
(at 100kHz)
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2,000 hours
at 105C.
Appearance
Capacitance change
D.F. (tanE)
No significant damage
[P20% of the initial value
[150% of the initial specified value
[150% of the initial specified value
[The initial specified value
ESR
Leakage current
Bias Humidity Test The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C,
90 to 95% RH for 1,000 hours.
Appearance
Capacitance change
D.F. (tanE)
No significant damage
[P20% of the initial value
[150% of the initial specified value
[150% of the initial specified value
[The initial specified value
ESR
Leakage current
Surge Voltage Test The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds
through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds.
Appearance
Capacitance change
D.F. (tanE)
No significant damage
[P20% of the initial value
[150% of the initial specified value
[150% of the initial specified value
[The initial specified value
ESR
Leakage current
Failure Rate
0.5% per 1,000 hours maximum (Confidence level 60% at 105C)
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105
.
C
DIMENSIONS [mm]
?
MARKING
?
@Terminal Code : E
EX) 4V560MF
Coated Case
292
A
560
4V
(FA5)
(HB5, JB5)
Size code
FA5
6.3
0.5
2.5
HB5
8.0
JB5
10.0
L'
15min.
4min.
fD
fd
F
0.8
3.5
5.0
fD'
L'
FD+0.5max
L+1.5max
L+0.3max
(1/2)
CAT. No. E1001K