APAX-5522PE Linux based RTU Controller
Features
NEW
IEC 61850-3 and IEEE-1613 certified for substation automation application
XScale PXA270 520 MHz processor
Wide temperature support (-20 ~ 70°C)
Supports up to 32 APAX I/O modules
Time-stamp function support
Linux OS support
2 x LAN ports support
RoHS
COMPLIANT
2002/95/EC
Introduction
IEC 61850-3 standards specify a number of “hardened” characteristics that network products should meet to withstand the potentially electromagnetically harsh substation environment:
such as immunity to electrical surge, electrostatic discharges and other phenomena that would cause non-hardened devices to fail. The APAX-5000PE series modules are IEC 61850-3
compliant and can be used in power & energy applications e.g. smart substation for good protection features.
Specifications
I/O Expansion
General
Connected I/O Modules 32 (max.)*
Certification
CE, FCC class A
Dielectric Strengh and Impulse Tests: IEC60255-5:2000
EMC Immunity: Electronic Discharge: IEC 61000-4-2:2001,level3
Radiated RF Immunity: IEC 61000-4-3:2002, 10 V/m
IEEE C37.90.2-1995, 35 V/m
Fast Transient, Burst Immunity: IEC 61000-4-4:1995 + A1:2001, 4kV @ 2.5KHz
Surge Immunity: IEC 61000-4-5:2001, 2kV line to line, 4kV line to earth
Conducted RF Immunity: IEC 61000-4-6:2004, 10 Vrms
Magnetic Field Immunity: IEC 61000-4-8:2001, 1000 A/m for 3 seconds, 100 A/m
for 1 minute
Digital Signals
Analog Signals
768 (max.)
192 (max.)
Communication (Ethernet)
LAN
2 x RJ-45 Port, 10/100 Mbps
Communication (Serial)
Medium
2 x Isolated RS-232
DOMF: IEC 61000-4-10:2001, 30 A/m @ 100KHz and 1 MHz
EMC Emissions
Conducted Emissions: EN 55011: 2002, Class A
Radiated Emissions: EN 55011: 2002, Class A
Environment
Operating Temperature -20 ~ 70°C (mounted vertically)
Storage Temperature -40 ~ 85°C
Relative Humidity
5 ~ 95% (non-condensing)
Dimensions (W x H x D) 60 x 139 x 100 mm (without backplane)
Enclosure
ABS+PC
Weight
Connectors
Power Consumption
180 g
DB-9
2 W @ 5 VDC (typical)
Ordering Information
APAX-5522PELX
APAX-5522PEKW
IEC 61850-3 Compliant PAC
IEC 61850-3 Compliant PAC, KW softlogic on WinCE
System Hardware
CPU
Memory Flash
Battery Backup Memory 256 KB file system, 256 KB direct access
Accessories
APAX-5002L
APAX-5350
Intel XScale PXA270 520 MHz
32 M bytes, SDRAM 64 M bytes
2-slot Backplane Module
APAX Power Filter for APAX PE modules
Real-time Clock
Watchdog Timer
Storage
Yes
Yes
1 x Type II CompactFlash card slot
Software
OS Support
Control Software
Linux Kernel 2.6 RT, KW software on WinCE
API library / MultiProg KW
*APAX DI/O modules can use ID number 0 ~ 31, while AI/O modules and counter modules can only use ID numbers 0 ~ 15
DIN-Rail IPCs
All product specifications are subject to change without notice
Last updated : 5-May-2015