Datasheet > AMIS-52150-XTP

AMIS-52150-XTP

更新时间： 2022-02-26 14:09:30

品牌	Logo	应用领域
安森美 - ONSEMI		/
页数	文件大小	规格书
21页	792K
描述
Low-power Transceiver

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

AMIS-52150-XTP 数据手册

AMIS-52150

Lowpower Transceiver

with Clock and Data

Recovery

Introduction

http://onsemi.com

The AMIS−52150 is a cost-effective, ultra-low power single-chip

wireless transceiver. It combines the proven Amplitude Shift

Key/On-Off Key (ASK/OOK) modulation technology of the

AMIS−52050 with data clock recovery.

Based on key features, such as dual independent receive channels,

Quick Start crystal oscillator, Sniff Mode signal acquisition, and data

clock recovery, the AMIS−52150 is ideally suited for a wide range of

applications, including point-to-point wireless data links,

cost-optimized wireless monitor solutions, and very low power remote

wireless sensors, among others.

SSOP−20

CASE TBD

ORDERING INFORMATION

See detailed ordering and shipping information in the package

dimensions section on page 20 of this data sheet.

Key Features

 Data Clock Recovery

 Auto Slicing of Data

 Very Low-power Single-chip Transceiver

 Minimal External Components

 Low-power RC Oscillator

 Serial TX/RX Data Port

 Quick Start Crystal Oscillator

 Clock Generation for an External Microprocessor

 Wake-up on RSSI

 Antenna Diversity Dual Receiver

 Internal VCO/PLL Tuning Varactor

 Wake-up Interrupt to External Controller

 These Devices are Pb-Free and are RoHS Compliant

 Ultra-low Power RF Sniff Mode, with Wake-up on

RSSI

 Internal Trim Functions Reduce External Component

Requirements

 I C Control Interface

Technical Features

 Operating Frequency Range:

 Sniff Mode Polling: 0.5 ms to 16 s

(0.5 ms or 64 ms Steps)

 PLL Lock Time: < 50 ms

 Quick Start, from 350 MHz to 448 MHz

 Non-quick Start, from 300 MHz to 768 MHz

 TX Output Power: +12 dBm

 RX Sensitivity:

 Sniff Mode: −93 dBm Minimum

 Receive: −117 dBm Minimum @ 1 kbps, with CDR

 Data Rate:

 Selectable Data Filter: Up to 20 kHz

 Internal Trim Functions:

 TX Power (−3 to +12 dBm)

 Antenna Impedance Matching (Two Independent

Channels)

 1−8 kbps with Manchester Coding

 1−16 kbps with NRZ Data

 Xtal, for Frequency and Quick Start

 RC Oscillator Frequency

 Sniff Mode, for Data Threshold

 Data slice

 Power Requirements:

 Receive: 7.5 mA (Continuous)

 Clock and Data Recovery (Reduced Data Jitter)

 I C Interface: Control Bus

 Serial Interface: Data Input/Output

 Low Frequency IF

 Internal IF Filtering

 Transmit: 25 mA @ Full Power (50% Duty-cycle)

 Sniff Mode: 75 mA (One Percent Duty-cycle)

 Standby: 500 nA (RC Oscillator Running)

 Operating Voltage: 2.3 V to 3.6 V

 Modulation: ASK/OOK

 Xtal Start Time: 15 ms (Quick Start)

 Package: 20-lead, 209 mm SSOP

 Semiconductor Components Industries, LLC, 2013

Publication Order Number:

July, 2013 − Rev. 8

AMIS−52150/D

12 3 4 5 6 7...21

下载PDF

与AMIS-52150-XTP相关器件

型号	品牌	描述	获取价格	数据表
AMIS-53000	AMI	Frequency Agile Transceiver	获取价格
AMIS-53000-I	ONSEMI	Telecom IC,	获取价格
AMIS-53000-I/A	AMI	Frequency Agile Transceiver	获取价格
AMIS-53000-M	ONSEMI	IC,TRANSCEIVER CIRCUIT FOR TELECOMMUNICATIONS,CMOS,QFP,32PIN,PLASTIC	获取价格
AMIS-53000-M	AMI	Frequency Agile Transceiver	获取价格
AMIS-5300-A	ONSEMI	IC,TRANSCEIVER CIRCUIT FOR TELECOMMUNICATIONS,CMOS,QFP,32PIN,PLASTIC	获取价格