AME, Inc.
300mA CMOS LDO with RESET Function
AME1300
n General Description
n Applications
The AME1300 combines a Low Dropout Regulator and
a Microprocessor Reset Monitor in a space-saving 8-Pin
MSOP package. Total supply current is 50µA(typical),20
to 60 times lower than in bipolar regulators .
l Instrumentation
l Portable Electronics
l Wireless Devices
l Cellular / GSM / CDMA Phones
l PC Peripherals
The AME1300 has an extremely precise output with a
typical accuracy of ±1.5%. Other key features include
l Battery Powered Widgets
ultra low noise operation, very low dropout voltage and
internal feed-forward compensation for fast response to
step changes in load. The AME1300 incorporates both
over-temperature and over-current protection. When the
shutdown control EN is low, the regulator output voltage
falls to zero,RESET output remains valid and supply cur-
rent is reduced to 10µA(typical). The AME1300 is stable
with an output capacitor of only 2.2µF and has a mini-
mum output current of 300 mA.
n Typical Applications
RESET
RESET
VDET
VDET
VDET and VOUT can be
connected together
VOUT
VOUT
GND
VIN
NC
VIN
An active low RESET is asserted when the detected
voltage ( VDET) falls below the reset voltage threshold.
The reset output remains low for 300msec(typical) after
VDET rises above reset threshold. The AME1300 also has
a fast wake up response time (10µsec typically) when
released from shutdown.
1300
SHUTDOWN
CONTROL
Bypass
EN
CBypass
(Option)
470pF
n Features
l LDO with intergrated Microprocessor Reset
Monitor Functionality
n Pin Configuration
l Guaranteed 300mA Output
l Accurate to within 1.5%
MSOP-8
Top View
1. RESET
2. VOUT
3. GND
4. Bypass
5. EN
8
7
6
5
l 50µA Quiescent Current
l Over-Temperature Shutdown
l Current Limiting
l Short Circuit Current Fold-back
l Noise Reduction Bypass Capacitor
1300
Xyww
6. NC
l Power-Saving Shutdown Mode
l Space-Saving MSOP Package
l Factory Pre-set Output Voltages
l Low Temperature Coefficient
7. VIN
8. VDET
2
3
4
1
Note: X represents the regulator
output voltage. yww represents
the date code.
Please contact AME for details
1