AM-155 / AMC-155
High Dynamic Range Amplifier,
12.5 dB Gain, 300 - 1000 MHz
Rev. V4
Features
2.5 dB Typical Midband Noise Figure
+21 dBm Typical Midband Output Power
+37 dBm Typical Midband Third Order Intercept
Outline Drawing: TO-8-1 *
Description
DC IN
RF IN
M/A-COM’s AM-155 is a coupler feedback amplifier
with high intercept and compression points. The use
of coupler feedback minimizes noise figure and
current in a high intercept amplifier. This amplifier is
packaged in a TO-8 package. Due to the internal
power dissipation the thermal rise minimized. The
ground plane on the PC board should be configured
to remove heat from under the package. AM-155 is
ideally suited for use where a high intercept, high
reliability amplifier is required.
.300
(7.6)
TYP.
.150
(3.8)
TYP.
RF OUT
GND
4X Ø .018+/-.005
(0.46+/-0.13)
.220
MIN
(5.6)
.220
MAX
(5.6)
.450
(11.4)
Ø
.50
(12.7+0.5)
Ordering Information
Part Number
AM-155 PIN 3
AMC-155 SMA
Package
TO-8-1
WEIGHT (APPROX) 0.10 OUNCES 2.8 GRAMS
Connectorized
Outline Drawing: SMA Connectorized *
3. Mounting kit part number AU00071 required for PCB
applications.
Absolute Maximum Ratings 1
Parameter
Absolute Maximum
Max. Input Power
+10 dBm
Vbias
+15.75 V
Operating Temperature
Storage Temperature
-55°C to +85°C
-65°C to +125°C
1. Operation of this device above any one of these parameters
may cause permanent damage.
Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support