AM3T-N Series
3 watt dc-dc converters
Picture
Available
Soon
24 PIN DIP PACKAGE
INPUT/OUTPUT ISOLATION OF 1500VDC
•
•
•
•
•
•
•
•
WIDE 2:1 INPUT RANGE
HIGH EFFICIENCY UP TO 83%
SHIELDED METAL PACKAGE
OPERATING TEMPERATURE: -40°C ... +85°C
CONTINUOUS SHORT CIRCUIT PROTECTION
PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS
GENERAL DESCRIPTION
Our AM3T-N series is a family of cost effective 3W
single and dual output DC/DC converters. These
converters combine a shielded metal package in a
24-pin DIP compatible case and includes high per-
formance features such as a 1500VDC input/output
isolation voltage, continuous short circuit protection
and a tight line / load regulation. Wide range devices
operate over a 2:1 input voltage range continuously
providing a stable output voltage.
32 models operate from input voltages of 5, 12, 24 and
48VDC with output voltages of 3.3, 5, 12, 15, ±5, ±9,
±12, ±15VDC. High performance features include high
efficiency operation up to 83% and output voltage
accuracy of ±1%. All models are packaged in a low
profile 31.75 x 20.32 x 9.45mm case. Operation is
specified over the full operating temperature range of
-40°C to +85°C with no derating required. Cooling is
by free-air convection.
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications:
General Specifications:
Efficiency
Voltage range
5VDC, 4.5~9VDC
12VDC, 9~18VDC
24VDC, 18~36VDC
48VDC, 36~72VDC
p(Pi) Network
64% to 83%
Switching frequency
300KHz, typ., 100% load
Output Specifications:
Voltage accuracy (Single)
Voltage accuracy (Dual)
Ripple
Noise (at 20MHz BW)
Short circuit protection
Line voltage regulation
Load voltage regulation
Temperature coefficient
Filter
±1%, typ.
±1% p. & ±3% n., typ.
30m Vp-p
Isolation Specifications:
Rated voltage (60 sec)
Resistance
1500VDC
> 1000MOhm
80pF, typ.
80mVp-p, typ.
Continuous
Capacitance
±0.2%, typ.
±0.1%, typ.
Environmental Specifications:
Operating temperature (ambient) -40°C ... +85°C
±0.03%/°C, max.
Storage temperature
Case Temperature
Derating
Humidity (non-condensing)
Cooling
-55°C ... +125°C
+100°C, max.
None required
Up to 95%
Physical Specifications:
Dimensions
31.75x20.32x9.45mm
1.25x0.80x0.40inches
16.3g
Weight
Case material
Free-air Convection
Metal
MTBF: > 1 000 000 hrs single, > 1 350 000 hrs dual (MIL-HDBK-217F, Ground Benign, t=+25°C)
Specifications are subject to change without notification.
Continued on next page
TO ORDER CALL 1-888-9-AIMTEC