AM3T Series
3 watt dc-dc converters
24 PIN DIP PACKAGE
INPUT/OUTPUT ISOLATION: 1500 & 3500VDC
OPERATING TEMPERATURE: -40°C ... +85°C
PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS
LOW PROFILE METAL PACKAGE
•
•
•
•
•
•
•
•
WIDE 2:1 INPUT RANGE
HIGH EFFICIENCY UP TO 79%
CONTINUOUS SHORT CIRCUIT PROTECTION
GENERAL DESCRIPTION
Our AM3T series is a family of cost effective 3W single
and dual output DC-DC converters. These converters
combine nickel-coated copper package in a 24-pin DIP
compatible case with high performance features such as
1500 & 3500VDC input/output isolation voltage, continu-
ous short circuit protection with automatic restart and tight
line / load regulation. Wide range devices operate over 2:1
input voltage range providing stable output
voltage. Devices are encapsulated using flame retardant
resin. Ninety six models operate from input voltages of 12,
24 & 48VDC with output voltages of 3.3, 5, 7.2, 9, 12, 15,
18, 24, ±3.3, ±5, ±7.2, ±9, ±12, ±15, ±18 & ±24VDC.
High performance features include high efficiency opera-
tion up to 79% and output voltage accuracy of ±1%
maximum. All models are package in a low profile 31.75
x 20.32 x 10.16mm 24 pin DIP nickel-coated copper case.
Operation is specified over the full operating temperature
range of -40°C to +85°C with no derating required.
Cooling is by free-air convection.
ELECTRICAL SPECIFICATIONS
Specifications typical at +25°C, nominal input voltage, rated output current unless otherwise specified
Input Specifications:
General Specifications:
Efficiency
Voltage range
12VDC, 9~18VDC
24VDC, 18~36VDC
48VDC, 36~72VDC
p (Pi) Network
74% to 79%
Switching frequency
250KHz, typ. 100% load
Output Specifications:
Filter
Voltage accuracy
±1%, max.
Voltage balance (Dual Output) ±1%
Isolation Specifications:
Rated voltage (60 sec)
Resistance
Ripple & noise (at 20MHz BW)60mVp-p, max.
1500, 3500VDC
> 1000MOhm
80pF, typ.
Short circuit protection
Short circuit restart
Continuous
Automatic
±0.5%, max.
±0.5%, max.
±0.02%/°C, typ.
Capacitance
Line voltage regulation
Load voltage regulation
Temperature coefficient
Environmental Specifications:
Operating temperature (ambient) -40°C ... +85°C
Storage temperature
Case temperature
Derating
Humidity (non-condensing)
Cooling
-55°C ... +125°C
+100°C, max.
None required
Up to 90%
Free-air Convection
Physical Specifications:
Dimensions
31.75x20.32x10.16mm
1.25x0.8x0.4inches
16.3g
Weight
Case material
Nickel-Coated Copper
MTBF: > 1,039,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25°C)
Specifications are subject to change without notification
48
TO ORDER CALL 1-888-9-AIMTEC