FINAL
Am27C1024
1 Megabit (65 K x 16-Bit) CMOS EPROM
DISTINCTIVE CHARACTERISTICS
■ Fast access time
■ ±10% power supply tolerance standard
■ 100% Flashrite™ programming
— Speed options as fast as 55 ns
■ Low power consumption
— 20 µA typical CMOS standby current
■ JEDEC-approved pinout
— 40-Pin DIP/PDIP
— Typical programming time of 8 seconds
■ Latch-up protected to 100 mA from –1 V to
VCC + 1 V
■ High noise immunity
■ Versatile features for simple interfacing
— Both CMOS and TTL input/output compatibility
— Two line control functions
— 44-Pin PLCC
■ Single +5 V power supply
GENERAL DESCRIPTION
The Am27C1024 is a 1 Megabit, ultraviolet erasable
programmable read-only memory. It is organized as 64
Kwords by 16 bits per word, operates from a single
+5 V supply, has a static standby mode, and features
fast single address location programming. Products are
available in windowed ceramic DIP packages, as well
as plastic one time programmable (OTP) PDIP and
PLCC packages.
thus eliminating bus contention in a multiple bus micro-
processor system.
AMD’s CMOS process technology provides high
speed, low power, and high noise immunity. Typical
power consumption is only 125 mW in active mode,
and 100 µW in standby mode.
All signals are TTL levels, including programming sig-
nals. Bit locations may be programmed singly, in
blocks, or at random. The device supports AMD’s
Flashrite programming algorithm (100 µs pulses), re-
sulting in a typical programming time of 8 seconds.
Data can be typically accessed in less than 55 ns, al-
lowing high-performance microprocessors to operate
without any WAIT states. The device offers separate
Output Enable (OE#) and Chip Enable (CE#) controls,
BLOCK DIAGRAM
V
Data Outputs
DQ0–DQ15
CC
V
V
SS
PP
Output Enable
Chip Enable
and
OE#
CE#
Output
Buffers
Prog Logic
PGM#
Y
Y
Gating
Decoder
A0–A15
Address
Inputs
1,048,576
Bit Cell
Matrix
X
Decoder
06780J-1
Publication# 06780 Rev: J Amendment/0
Issue Date: May 1998